HH3C-EPON-UNI-MIB :: hh3cEponUniVLANTrunkAllowListHigh

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-EPON-UNI-MIB › hh3cEponUniVLANTrunkAllowListHigh

hh3cEponUniVLANTrunkAllowListHigh

Module: HH3C-EPON-UNI-MIB

OID (symbolic): HH3C-EPON-UNI-MIB::hh3cEponUniVLANTrunkAllowListHigh

OID (numeric): 1.3.6.1.4.1.25506.2.42.5.1.1.1.10

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 2049 through 2056, the second octet specifying vlans 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered vlan, and the least significant bit represents the lowest numbered vlan. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans; the vlan is not allowed if its bit has a value of '0'.

What is hh3cEponUniVLANTrunkAllowListHigh?

Bitmap covering VLANs 2049-4094 (8 VLANs per octet, MSB = highest numbered) that this trunk UNI port is allowed to carry, complementing hh3cEponUniVLANTrunkAllowListLow for the upper VLAN range.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.42.5.1.1.1.10
snmpwalk -v2c -c public <target> HH3C-EPON-UNI-MIB::hh3cEponUniVLANTrunkAllowListHigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.42.5.1.1.1.10.1
snmpget -v2c -c public <target> HH3C-EPON-UNI-MIB::hh3cEponUniVLANTrunkAllowListHigh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.42.5.1.1.1.10.1 s <value>

Start monitoring H3C EPON ONU subscriber equipment (UNI port config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-EPON-UNI-MIB::hh3cEponUniVLANTrunkAllowListHigh OID value, configure state conditions and alerts, and monitor any H3C EPON ONU subscriber equipment (UNI port config) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
1.3.6.1.4.1.25506.2.42hh3cEponHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.42.5hh3cEponUniHH3C-EPON-UNI-MIB
1.3.6.1.4.1.25506.2.42.5.1hh3cEponUniSysManHH3C-EPON-UNI-MIB
1.3.6.1.4.1.25506.2.42.5.1.1hh3cEponUniSysManTableHH3C-EPON-UNI-MIB
1.3.6.1.4.1.25506.2.42.5.1.1.1hh3cEponUniSysManEntryHH3C-EPON-UNI-MIB
1.3.6.1.4.1.25506.2.42.5.1.1.1.10hh3cEponUniVLANTrunkAllowListHighHH3C-EPON-UNI-MIB