HH3C-EPON-UNI-MIB :: hh3cEponUniMirrorInboundPortList

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-EPON-UNI-MIB › hh3cEponUniMirrorInboundPortList

hh3cEponUniMirrorInboundPortList

Module: HH3C-EPON-UNI-MIB

OID (symbolic): HH3C-EPON-UNI-MIB::hh3cEponUniMirrorInboundPortList

OID (numeric): 1.3.6.1.4.1.25506.2.42.5.1.13.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: UNI inbound port list. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered UNI, and the least significant bit represents the lowest numbered UNI. Thus, each UNI port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is allowed in the set of ports. the port is not allowed if its bit has a value of '0'.

What is hh3cEponUniMirrorInboundPortList?

Bitmap of UNI ports (8 per octet, MSB = highest numbered) whose inbound traffic is mirrored under this mirror group, used to select which subscriber ports' ingress traffic gets copied to the monitor port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.42.5.1.13.1.2
snmpwalk -v2c -c public <target> HH3C-EPON-UNI-MIB::hh3cEponUniMirrorInboundPortList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.42.5.1.13.1.2.1
snmpget -v2c -c public <target> HH3C-EPON-UNI-MIB::hh3cEponUniMirrorInboundPortList.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.42.5.1.13.1.2.1 s <value>

Start monitoring H3C EPON ONU subscriber equipment (UNI port config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-EPON-UNI-MIB::hh3cEponUniMirrorInboundPortList OID value, configure state conditions and alerts, and monitor any H3C EPON ONU subscriber equipment (UNI port config) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
1.3.6.1.4.1.25506.2.42hh3cEponHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.42.5hh3cEponUniHH3C-EPON-UNI-MIB
1.3.6.1.4.1.25506.2.42.5.1hh3cEponUniSysManHH3C-EPON-UNI-MIB
1.3.6.1.4.1.25506.2.42.5.1.13hh3cEponUniMirrorGroupTableHH3C-EPON-UNI-MIB
1.3.6.1.4.1.25506.2.42.5.1.13.1hh3cEponUniMirrorGroupEntryHH3C-EPON-UNI-MIB
1.3.6.1.4.1.25506.2.42.5.1.13.1.2hh3cEponUniMirrorInboundPortListHH3C-EPON-UNI-MIB