All MIBs › HH3C-DHCP-SNOOP2-MIB › hh3cDhcpSnoop2IfOpt82CIDNodeType
hh3cDhcpSnoop2IfOpt82CIDNodeType
Module: HH3C-DHCP-SNOOP2-MIB
OID (symbolic): HH3C-DHCP-SNOOP2-MIB::hh3cDhcpSnoop2IfOpt82CIDNodeType
OID (numeric): 1.3.6.1.4.1.25506.2.124.2.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Type of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of hh3cDhcpSnoop2IfOption82CIDMode is set to 'verbose'.
The SET operation of this object must be with the SET operation of hh3cDhcpSnoop2IfOpt82CIDMode.
'invalid' indicates that the node identifier is NOT used to fill in the circuit ID suboption of option 82. If the value of hh3cDhcpSnoop2IfOpt82CIDMode is NOT 'verbose', the value of this object is set to 'invalid' automatically. Otherwise the value of this object cannot be set to 'invalid'.
'mac' indicates that the node identifier is filled in with the bridge MAC of DHCP snooping device. If the value of hh3cDhcpSnoop2IfOpt82CIDMode is set to 'verbose', the default value of this object is 'mac'.
'sysname' indicates that the node identifier is filled in with the sysname of the DHCP snooping.
'userDefine' indicates the node identifier is filled in with the string defined by the object of hh3cDhcpSnoop2IfOpt82CIDNodeStr. If the value is set to 'userDefine', the value of hh3cDhcpSnoop2IfOpt82CIDNodeStr must also be set to a non-zero length string.
What is hh3cDhcpSnoop2IfOpt82CIDNodeType?
In verbose Circuit ID mode, chooses what identifies this access node in the suboption: mac(2) uses the switch's bridge MAC (the verbose-mode default), sysname(3) uses the device's configured sysname, and userDefine(4) pulls the string from the CID node string object; invalid(1) is forced automatically whenever CIDMode isn't verbose.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.124.2.2.1.10 snmpwalk -v2c -c public <target> HH3C-DHCP-SNOOP2-MIB::hh3cDhcpSnoop2IfOpt82CIDNodeType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.124.2.2.1.10.1 snmpget -v2c -c public <target> HH3C-DHCP-SNOOP2-MIB::hh3cDhcpSnoop2IfOpt82CIDNodeType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.124.2.2.1.10.1 i <value>
Start monitoring H3C access-layer switch (DHCP Snooping v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-DHCP-SNOOP2-MIB::hh3cDhcpSnoop2IfOpt82CIDNodeType OID value, configure state conditions and alerts, and monitor any H3C access-layer switch (DHCP Snooping v2) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.124 | hh3cDhcpSnoop2 | HH3C-DHCP-SNOOP2-MIB |
| 1.3.6.1.4.1.25506.2.124.2 | hh3cDhcpSnoop2Tables | HH3C-DHCP-SNOOP2-MIB |
| 1.3.6.1.4.1.25506.2.124.2.2 | hh3cDhcpSnoop2IfConfigTable | HH3C-DHCP-SNOOP2-MIB |
| 1.3.6.1.4.1.25506.2.124.2.2.1 | hh3cDhcpSnoop2IfConfigEntry | HH3C-DHCP-SNOOP2-MIB |
| 1.3.6.1.4.1.25506.2.124.2.2.1.10 | hh3cDhcpSnoop2IfOpt82CIDNodeType | HH3C-DHCP-SNOOP2-MIB |