All MIBs › H3C-RAID-MIB › h3cRaidType
h3cRaidType
Module: H3C-RAID-MIB
OID (symbolic): H3C-RAID-MIB::h3cRaidType
OID (numeric): 1.3.6.1.4.1.2011.10.10.4.1.3.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object identifies the physical type of an array. The value 'virtualDevice' means if a array is prepared for virtual device, it can be used to create LV, for exampe, it is can be split into a lot of LV, or be a part of LV. The value 'directDevice' means if a array is prepared for direct device, it can be used to create a LV which type is direct. Unlike virtual devices, they cannot be combined or split into multiple logical devices. The value 'serviceEnabledDevice' means if a array is prepared for service-enabled device, it can be used to create a LV which type is service-enabled. Unlike virtual devices, they cannot be combined or split into multiple logical devices. The value 'unassigned' means it is the original status of a array, if a array is unassigned, it can't be used to create LV.
What is h3cRaidType?
The physical device type this array is prepared for: a virtual device (splittable/combinable into multiple LVs), a direct device (used for one fixed-type LV, not combinable or splittable), a service-enabled device (similar restriction, for service-enabled LVs), or unassigned (its initial state, not yet usable for LV creation). An admin sets this before an array can be carved into logical volumes, choosing virtualDevice(1) when flexible LV splitting/combining is needed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.10.4.1.3.1.8 snmpwalk -v2c -c public <target> H3C-RAID-MIB::h3cRaidType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.10.4.1.3.1.8.1 snmpget -v2c -c public <target> H3C-RAID-MIB::h3cRaidType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.10.10.4.1.3.1.8.1 i <value>
Start monitoring H3C server/storage system with hardware RAID controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-RAID-MIB::h3cRaidType OID value, configure state conditions and alerts, and monitor any H3C server/storage system with hardware RAID controller from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.10 | h3c | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.10 | h3cStorageRef | H3C-STORAGE-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.10.10.4 | h3cRaid | H3C-RAID-MIB |
| 1.3.6.1.4.1.2011.10.10.4.1 | h3cRaidMibObjects | H3C-RAID-MIB |
| 1.3.6.1.4.1.2011.10.10.4.1.3 | h3cRaidManageTable | H3C-RAID-MIB |
| 1.3.6.1.4.1.2011.10.10.4.1.3.1 | h3cRaidManageEntry | H3C-RAID-MIB |
| 1.3.6.1.4.1.2011.10.10.4.1.3.1.8 | h3cRaidType | H3C-RAID-MIB |