All MIBs › H3C-IPSEC-MONITOR-V2-MIB › h3cIPsecTunIKETunRemoteIDVal1V2
h3cIPsecTunIKETunRemoteIDVal1V2
Module: H3C-IPSEC-MONITOR-V2-MIB
OID (symbolic): H3C-IPSEC-MONITOR-V2-MIB::h3cIPsecTunIKETunRemoteIDVal1V2
OID (numeric): 1.3.6.1.4.1.2011.10.2.126.1.2.1.8
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The value of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).
If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer.
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address.
If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range.
If the remote peer type is fqdn/userFqdn, this is the host name used to identify the remote peer.
If the remote peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA.
If the remote peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA.
If the remote peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
What is h3cIPsecTunIKETunRemoteIDVal1V2?
Holds the primary value of the remote peer's identity for the associated IKE tunnel, interpreted per h3cIPsecTunIKETunRemoteIDTypeV2, the remote-side counterpart to h3cIPsecTunIKETunLocalIDVal1V2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.126.1.2.1.8 snmpwalk -v2c -c public <target> H3C-IPSEC-MONITOR-V2-MIB::h3cIPsecTunIKETunRemoteIDVal1V2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.126.1.2.1.8.1 snmpget -v2c -c public <target> H3C-IPSEC-MONITOR-V2-MIB::h3cIPsecTunIKETunRemoteIDVal1V2.1
Start monitoring H3C router/security gateway/firewall (IPsec VPN tunnel stats, v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-IPSEC-MONITOR-V2-MIB::h3cIPsecTunIKETunRemoteIDVal1V2 OID value, configure state conditions and alerts, and monitor any H3C router/security gateway/firewall (IPsec VPN tunnel stats, v2) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.10 | h3c | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.2 | h3cCommon | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.10.2.126 | h3cIPsecMonitorV2 | H3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.2011.10.2.126.1 | h3cIPsecObjectsV2 | H3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.2011.10.2.126.1.2 | h3cIPsecTunnelV2Table | H3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.2011.10.2.126.1.2.1 | h3cIPsecTunnelV2Entry | H3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.2011.10.2.126.1.2.1.8 | h3cIPsecTunIKETunRemoteIDVal1V2 | H3C-IPSEC-MONITOR-V2-MIB |