All MIBs › H3C-IPSEC-MONITOR-V2-MIB › h3cIPsecTunIKETunLocalIDVal1V2
h3cIPsecTunIKETunLocalIDVal1V2
Module: H3C-IPSEC-MONITOR-V2-MIB
OID (symbolic): H3C-IPSEC-MONITOR-V2-MIB::h3cIPsecTunIKETunLocalIDVal1V2
OID (numeric): 1.3.6.1.4.1.2011.10.2.126.1.2.1.5
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The value of the local peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable).
If the local peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the local peer.
If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address.
If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range.
If the local peer type is fqdn/userFqdn, this is the host name used to identify the local peer.
If the local peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA.
If the local peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA.
If the local peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
What is h3cIPsecTunIKETunLocalIDVal1V2?
Holds the primary value of the local peer's identity for the associated IKE tunnel, whose meaning depends on h3cIPsecTunIKETunLocalIDTypeV2: an IP address, the start of an address range or subnet, a hostname (FQDN), or a certificate-related binary value. It's the local counterpart to h3cIPsecTunIKETunRemoteIDVal1V2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.126.1.2.1.5 snmpwalk -v2c -c public <target> H3C-IPSEC-MONITOR-V2-MIB::h3cIPsecTunIKETunLocalIDVal1V2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.126.1.2.1.5.1 snmpget -v2c -c public <target> H3C-IPSEC-MONITOR-V2-MIB::h3cIPsecTunIKETunLocalIDVal1V2.1
Start monitoring H3C router/security gateway/firewall (IPsec VPN tunnel stats, v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-IPSEC-MONITOR-V2-MIB::h3cIPsecTunIKETunLocalIDVal1V2 OID value, configure state conditions and alerts, and monitor any H3C router/security gateway/firewall (IPsec VPN tunnel stats, v2) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.10 | h3c | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.2 | h3cCommon | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.10.2.126 | h3cIPsecMonitorV2 | H3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.2011.10.2.126.1 | h3cIPsecObjectsV2 | H3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.2011.10.2.126.1.2 | h3cIPsecTunnelV2Table | H3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.2011.10.2.126.1.2.1 | h3cIPsecTunnelV2Entry | H3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.2011.10.2.126.1.2.1.5 | h3cIPsecTunIKETunLocalIDVal1V2 | H3C-IPSEC-MONITOR-V2-MIB |