All MIBs › H3C-FC-ZONE-SERVER-MIB › h3cFcZsServerLastResult
h3cFcZsServerLastResult
Module: H3C-FC-ZONE-SERVER-MIB
OID (symbolic): H3C-FC-ZONE-SERVER-MIB::h3cFcZsServerLastResult
OID (numeric): 1.3.6.1.4.1.2011.10.2.127.9.1.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current operational status of the latest configuration in this VSAN:
'none' - No corresponding operation has been performed yet. 'success' - The configuration was performed successfully. 'busy' - The configuration was performed unsuccessfully, because the system is busy with another zoning operation. 'noSupportInFabric' - The configuration was performed unsuccessfully, because one or more switches in this Fabric don't support Enhanced zoning. 'noSupportInBasic' - The configuration was performed unsuccessfully, because it is not supported in Basic mode. 'noSupportInEnhanced' - The configuration was performed unsuccessfully, because it is not supported in Enhanced mode. 'activeZoneSetTooBig' - The configuration was performed unsuccessfully, because the Active Zone Set is too large to be supported. 'otherFault' - The configuration was performed unsuccessfully for other reasons.
What is h3cFcZsServerLastResult?
This reports the outcome of the most recent zoning configuration operation on this VSAN's Zone Server: none(1), success(2), busy(3), noSupportInFabric(4), noSupportInBasic(5), noSupportInEnhanced(6), activeZoneSetTooBig(7), or otherFault(8). Admins check this after pushing a zoning change to confirm it actually took effect rather than silently failing, for example due to one switch in the fabric lacking Enhanced-mode support.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.127.9.1.1.1.1.6 snmpwalk -v2c -c public <target> H3C-FC-ZONE-SERVER-MIB::h3cFcZsServerLastResult
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.127.9.1.1.1.1.6.1 snmpget -v2c -c public <target> H3C-FC-ZONE-SERVER-MIB::h3cFcZsServerLastResult.1
Start monitoring H3C Fibre Channel SAN switch (Basic/Enhanced Zoning) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-FC-ZONE-SERVER-MIB::h3cFcZsServerLastResult OID value, configure state conditions and alerts, and monitor any H3C Fibre Channel SAN switch (Basic/Enhanced Zoning) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10 | h3c | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.2 | h3cCommon | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.2.127 | h3cSan | H3C-VSAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.10.2.127.9 | h3cFcZoneServer | H3C-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.2011.10.2.127.9.1 | h3cFcZoneMibObjects | H3C-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.2011.10.2.127.9.1.1 | h3cFcZsConfiguration | H3C-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.2011.10.2.127.9.1.1.1 | h3cFcZsServerTable | H3C-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.2011.10.2.127.9.1.1.1.1 | h3cFcZsServerEntry | H3C-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.2011.10.2.127.9.1.1.1.1.6 | h3cFcZsServerLastResult | H3C-FC-ZONE-SERVER-MIB |