All MIBs › GW-EPON-DEV-MIB › alarmSynEnable
alarmSynEnable
Module: GW-EPON-DEV-MIB
OID (symbolic): GW-EPON-DEV-MIB::alarmSynEnable
OID (numeric): 1.3.6.1.4.1.10072.2.15.1.3.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Alarm Synchronization Enable. If the value of this object is 'disable(2)', all the history alarm will be clear.
What is alarmSynEnable?
Turns alarm synchronization on or off; setting it to disable also clears all historical alarm entries, so use with care.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10072.2.15.1.3.3 snmpwalk -v2c -c public <target> GW-EPON-DEV-MIB::alarmSynEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10072.2.15.1.3.3.1 snmpget -v2c -c public <target> GW-EPON-DEV-MIB::alarmSynEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10072.2.15.1.3.3.1 i <value>
Start monitoring EPON OLT and ONU devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GW-EPON-DEV-MIB::alarmSynEnable OID value, configure state conditions and alerts, and monitor any EPON OLT and ONU devices from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.10072 | gwtt | GWTT-SMI |
| 1.3.6.1.4.1.10072.2 | devices | GWTT-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10072.2.15 | eponDevManMIB | GW-EPON-DEV-MIB |
| 1.3.6.1.4.1.10072.2.15.1 | eponDevManMIBObjects | GW-EPON-DEV-MIB |
| 1.3.6.1.4.1.10072.2.15.1.3 | logEventGroup | GW-EPON-DEV-MIB |
| 1.3.6.1.4.1.10072.2.15.1.3.3 | alarmSynEnable | GW-EPON-DEV-MIB |