GSM7312-QOS-ACL-MIB

All MIBs › GSM7312-QOS-ACL-MIB

Organization: Netgear

Last Updated: 2003-05-06

Category: Technology: QoS, Vendor: Netgear

Description: Netgear GSM7312 switch MIB for Access Control List configuration in quality of service policy enforcement.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GSM7312-QOS-ACL-MIB?

GSM7312-QOS-ACL-MIB is a switch-software MIB copyrighted by LVL7 Systems, Inc. (an embedded switch-OS vendor whose stack underlies several branded products, here deployed on Netgear's GSM7312 switch) under the vendor's gsm7312QOS enterprise tree, providing Access Control List configuration as part of the device's QoS policy framework. aclTable and aclIfTable track each ACL instance's lifecycle (aclStatus RowStatus) and which interfaces/directions (inbound/outbound) it is bound to, while aclRuleTable holds the actual classification rules - protocol number, source/destination IP address and mask, Layer 4 source/destination port or port ranges, and IP DSCP/precedence/TOS bits and mask - each with a permit/deny aclRuleAction and its own RowStatus. Because every configuration object uses RowStatus rather than exposing hit counters, this MIB is oriented toward confirming ACL configuration state (which rules and interface bindings are active) rather than traffic-match statistics. It is deployed on Netgear GSM7312 managed switches enforcing QoS-integrated packet filtering, and administrators download the GSM7312-QOS-ACL-MIB file to verify that intended ACL rules and interface bindings remain active.

IPNetwork Monitor allows you to monitor SNMP objects defined in GSM7312-QOS-ACL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear GSM7312 managed switch

Monitoring Examples

An operator polls aclIfStatus for a given aclIndex/aclIfIndex/aclIfDirection combination in aclIfTable, and a row missing or showing notInService instead of active(1) would indicate an ACL that was configured but never bound to (or fell off) the intended interface direction.

What Can Be Monitored

ACL instance and interface-binding row status
ACL rule match criteria (protocol, IP, port, DSCP/TOS)
ACL rule permit/deny action
ACL rule row status/lifecycle

Imported Objects

From GSM7312-QOS-MIB

gsm7312QOS

MODULE-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
gsm7312QOSACL	1.3.6.1.4.1.4526.1.6.3.2
aclTable	1.3.6.1.4.1.4526.1.6.3.2.1		not-accessible	A table of ACL instances.
aclEntry	1.3.6.1.4.1.4526.1.6.3.2.1.1		not-accessible
I32 aclIndex	1.3.6.1.4.1.4526.1.6.3.2.1.1.1	Integer32	not-accessible	The ACL index this instance is associated with.
ROW aclStatus	1.3.6.1.4.1.4526.1.6.3.2.1.1.3	RowStatus	read-create	Status of this instance. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
aclIfTable	1.3.6.1.4.1.4526.1.6.3.2.2		not-accessible	A table of ACL interface instances.
aclIfEntry	1.3.6.1.4.1.4526.1.6.3.2.2.1		not-accessible
I32 aclIfIndex	1.3.6.1.4.1.4526.1.6.3.2.2.1.1	Integer32	not-accessible	The interface this ACL instance is associated with.
INT aclIfDirection	1.3.6.1.4.1.4526.1.6.3.2.2.1.2	INTEGER	not-accessible	The direction this ACL instance applies.
ROW aclIfStatus	1.3.6.1.4.1.4526.1.6.3.2.2.1.3	RowStatus	read-create	Status of this instance. active(1) - this ACL index instance is active createAndGo(4) - set to this value to assign an interface to an ACL destroy(6) - set to this value to remove an interface to an ACL
aclRuleTable	1.3.6.1.4.1.4526.1.6.3.2.3		not-accessible	A table of ACL Rules instances.
aclRuleEntry	1.3.6.1.4.1.4526.1.6.3.2.3.1		not-accessible	A table of ACL Classification Rules
I32 aclRuleIndex	1.3.6.1.4.1.4526.1.6.3.2.3.1.1	Integer32	not-accessible	The index of this instance.
INT aclRuleAction	1.3.6.1.4.1.4526.1.6.3.2.3.1.2	INTEGER	read-create	The type of action this rule should perform.
I32 aclRuleProtocol	1.3.6.1.4.1.4526.1.6.3.2.3.1.3	Integer32	read-create	icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
IP aclRuleSrcIpAddress	1.3.6.1.4.1.4526.1.6.3.2.3.1.4	IpAddress	read-create	The Source IP Address used in the ACL Classification.
IP aclRuleSrcIpMask	1.3.6.1.4.1.4526.1.6.3.2.3.1.5	IpAddress	read-create	The Source IP Mask used in the ACL Classification.
I32 aclRuleSrcL4Port	1.3.6.1.4.1.4526.1.6.3.2.3.1.6	Integer32	read-create	The Source Port Number (Layer 4) used in the ACL Classification.
I32 aclRuleSrcL4PortRangeStart	1.3.6.1.4.1.4526.1.6.3.2.3.1.7	Integer32	read-create	The Source Port Number(Layer 4) range start.
I32 aclRuleSrcL4PortRangeEnd	1.3.6.1.4.1.4526.1.6.3.2.3.1.8	Integer32	read-create	The Source Port Number(Layer 4) range end.
IP aclRuleDestIpAddress	1.3.6.1.4.1.4526.1.6.3.2.3.1.9	IpAddress	read-create	The Destination IP Address used in the ACL Classification.
IP aclRuleDestIpMask	1.3.6.1.4.1.4526.1.6.3.2.3.1.10	IpAddress	read-create	The Destination IP Mask used in the ACL Classification.
I32 aclRuleDestL4Port	1.3.6.1.4.1.4526.1.6.3.2.3.1.11	Integer32	read-create	The Destination Port (Layer 4) used in ACl classification.
I32 aclRuleDestL4PortRangeStart	1.3.6.1.4.1.4526.1.6.3.2.3.1.12	Integer32	read-create	The Destination Port (Layer 4) starting range used in ACL classification.
I32 aclRuleDestL4PortRangeEnd	1.3.6.1.4.1.4526.1.6.3.2.3.1.13	Integer32	read-create	The Destination Port (Layer 4) ending range used in ACL classification.
I32 aclRuleIPDSCP	1.3.6.1.4.1.4526.1.6.3.2.3.1.14	Integer32	read-create	The Differentiated Services Code Point value.
I32 aclRuleIpPrecedence	1.3.6.1.4.1.4526.1.6.3.2.3.1.15	Integer32	read-create	The Type of Service (TOS) IP Precedence value.
I32 aclRuleIpTosBits	1.3.6.1.4.1.4526.1.6.3.2.3.1.16	Integer32	read-create	The Type of Service (TOS) Bits value.
I32 aclRuleIpTosMask	1.3.6.1.4.1.4526.1.6.3.2.3.1.17	Integer32	read-create	The Type of Service (TOS) Mask value.
ROW aclRuleStatus	1.3.6.1.4.1.4526.1.6.3.2.3.1.18	RowStatus	read-create	Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance

RFC description

Gemstone Systems vendor-private MIB for GSM7312 QoS and Access Control List management.

Start monitoring Netgear GSM7312 managed switch (ACL-based QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GSM7312-QOS-ACL-MIB

What Is GSM7312-QOS-ACL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description