All MIBs › GIGAswitchEthernet-MIB › gsEL2AddressControlPersistence
gsEL2AddressControlPersistence
Module: GIGAswitchEthernet-MIB
OID (symbolic): GIGAswitchEthernet-MIB::gsEL2AddressControlPersistence
OID (numeric): 1.3.6.1.4.1.36.2.18.39.5.1.4.3.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The persistence of the entry to be created:
permanent(1) - Address is not aged out. Additionally, if the address is seen as a source on a different port for this VLAN, the frame is filtered and the filter event is counted. Static address entries are stored in non-volatile memory and are restored to the address table following each system reset.
deleteOnReset(2) - Indicates that the entry is not to be aged, however the entry is not stored in non-volatile memory. Therefore, when the device is reset, the entry will not be restored.
deleteOnTimeout(3) - Indicates that the entry is to be aged by the normal aging process.
What is gsEL2AddressControlPersistence?
Specifies the persistence mode the new static address entry should be created with: permanent(1) survives reboot and never ages, deleteOnReset(2) never ages but is lost on reboot, deleteOnTimeout(3) ages normally. Admins typically choose permanent(1) when statically pinning a MAC to a port through this control table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.39.5.1.4.3.1.1.6 snmpwalk -v2c -c public <target> GIGAswitchEthernet-MIB::gsEL2AddressControlPersistence
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.39.5.1.4.3.1.1.6.1 snmpget -v2c -c public <target> GIGAswitchEthernet-MIB::gsEL2AddressControlPersistence.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.39.5.1.4.3.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> gsEL2AddressControlPersistence.1
Start monitoring Digital Equipment Corporation (DEC) GIGAswitch/Ethernet chassis switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GIGAswitchEthernet-MIB::gsEL2AddressControlPersistence OID value, configure state conditions and alerts, and monitor any Digital Equipment Corporation (DEC) GIGAswitch/Ethernet chassis switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.39 | gsEMIB | GIGAswitchEthernet-MIB |
| 1.3.6.1.4.1.36.2.18.39.5 | gsESwitching | GIGAswitchEthernet-MIB |
| 1.3.6.1.4.1.36.2.18.39.5.1 | gsESwitchingLayerII | GIGAswitchEthernet-MIB |
| 1.3.6.1.4.1.36.2.18.39.5.1.4 | gsEL2AddrMgmt | GIGAswitchEthernet-MIB |
| 1.3.6.1.4.1.36.2.18.39.5.1.4.3 | gsEL2AddrControlMgt | GIGAswitchEthernet-MIB |
| 1.3.6.1.4.1.36.2.18.39.5.1.4.3.1 | gsEL2AddressControlTable | GIGAswitchEthernet-MIB |
| 1.3.6.1.4.1.36.2.18.39.5.1.4.3.1.1 | gsEL2AddressControlEntry | GIGAswitchEthernet-MIB |
| 1.3.6.1.4.1.36.2.18.39.5.1.4.3.1.1.6 | gsEL2AddressControlPersistence | GIGAswitchEthernet-MIB |