All MIBs › GEPARALLELUPS-MIB › upsParametersReadfifth
upsParametersReadfifth
Module: GEPARALLELUPS-MIB
OID (symbolic): GEPARALLELUPS-MIB::upsParametersReadfifth
OID (numeric): 1.3.6.1.4.1.818.1.1.15.10.7
Node type: OBJECT-TYPE
Type: PositiveInteger32
Access: read-write
Description: The number of parameters to retreive from the UPS. When this object is set the ParameterTable will be filled with the requested number of entries. The value upsParametersStartAddress will be used as the start value of the table with the lowest index number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.1.1.15.10.7 snmpwalk -v2c -c public <target> GEPARALLELUPS-MIB::upsParametersReadfifth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.818.1.1.15.10.7.1 snmpget -v2c -c public <target> GEPARALLELUPS-MIB::upsParametersReadfifth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.818.1.1.15.10.7.1 i <value>
Start monitoring GE Digital Energy parallel/redundant UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GEPARALLELUPS-MIB::upsParametersReadfifth OID value, configure state conditions and alerts, and monitor any GE Digital Energy parallel/redundant UPS system from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.818 | imv | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1 | geHardware | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1 | geUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.15 | geFifthUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.15.10 | upsGetSet_fifth | GE-PARALLELUPS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.818.1.1.15.10.7 | upsParametersReadfifth | GEPARALLELUPS-MIB |