All MIBs › GE-PARALLELUPS › upsParametersWrite_first
upsParametersWrite_first
Module: GE-PARALLELUPS
OID (symbolic): GE-PARALLELUPS::upsParametersWrite_first
OID (numeric): 1.3.6.1.4.1.818.1.1.11.10.8
Node type: OBJECT-TYPE
Type: PositiveInteger32
Access: read-write
Description: The number of parameters to write to the UPS. When this object is set the ParameterTable will be send to the ups. The value upsParametersStartAddress will be used for the first value of the table with the lowest index number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.1.1.11.10.8 snmpwalk -v2c -c public <target> GE-PARALLELUPS::upsParametersWrite_first
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.818.1.1.11.10.8.1 snmpget -v2c -c public <target> GE-PARALLELUPS::upsParametersWrite_first.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.818.1.1.11.10.8.1 i <value>
Start monitoring GE parallel-redundant UPS installation with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GE-PARALLELUPS::upsParametersWrite_first OID value, configure state conditions and alerts, and monitor any GE parallel-redundant UPS installation from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.818 | imv | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1 | geHardware | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1 | geUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.11 | geFirstUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.11.10 | upsGetSet_first | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.11.10.8 | upsParametersWrite_first | GE-PARALLELUPS |