All MIBs › GE-PARALLELUPS › upsParametersRead_second
upsParametersRead_second
Module: GE-PARALLELUPS
OID (symbolic): GE-PARALLELUPS::upsParametersRead_second
OID (numeric): 1.3.6.1.4.1.818.1.1.12.10.7
Node type: OBJECT-TYPE
Type: PositiveInteger32
Access: read-write
Description: The number of parameters to retreive from the UPS. When this object is set the ParameterTable will be filled with the requested number of entries. The value upsParametersStartAddress will be used as the start value of the table with the lowest index number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.1.1.12.10.7 snmpwalk -v2c -c public <target> GE-PARALLELUPS::upsParametersRead_second
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.818.1.1.12.10.7.1 snmpget -v2c -c public <target> GE-PARALLELUPS::upsParametersRead_second.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.818.1.1.12.10.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> upsParametersRead_second.1
Start monitoring GE parallel-redundant UPS installation with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GE-PARALLELUPS::upsParametersRead_second OID value, configure state conditions and alerts, and monitor any GE parallel-redundant UPS installation from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.818 | imv | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1 | geHardware | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1 | geUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.12 | geSecondUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.12.10 | upsGetSet_second | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.12.10.7 | upsParametersRead_second | GE-PARALLELUPS |