All MIBs › GE-PARALLELUPS › upsLoadSource_first
upsLoadSource_first
Module: GE-PARALLELUPS
OID (symbolic): GE-PARALLELUPS::upsLoadSource_first
OID (numeric): 1.3.6.1.4.1.818.1.1.11.8.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The present source of the load. Setting this object to 'On bypass' will cause the load to be supplied by the bypass. Setting this object to 'On inverter' will cause the load to be supplied by the inverter. If the load is already supplied by the desired source nothing will happen.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.1.1.11.8.13 snmpwalk -v2c -c public <target> GE-PARALLELUPS::upsLoadSource_first
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.818.1.1.11.8.13.1 snmpget -v2c -c public <target> GE-PARALLELUPS::upsLoadSource_first.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.818.1.1.11.8.13.1 i <value>
Start monitoring GE parallel-redundant UPS installation with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GE-PARALLELUPS::upsLoadSource_first OID value, configure state conditions and alerts, and monitor any GE parallel-redundant UPS installation from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.818 | imv | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1 | geHardware | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1 | geUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.11 | geFirstUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.11.8 | upsControl_first | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.11.8.13 | upsLoadSource_first | GE-PARALLELUPS |