All MIBs › GE-PARALLELUPS › upsAutoRestart_eighth
upsAutoRestart_eighth
Module: GE-PARALLELUPS
OID (symbolic): GE-PARALLELUPS::upsAutoRestart_eighth
OID (numeric): 1.3.6.1.4.1.818.1.1.18.8.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to 'on' will cause the UPS system to restart after a shutdown if the shutdown occurred during a power loss as a result of either a upsShutdownAfterDelay or an internal battery depleted condition. Setting this object to 'off' will prevent the UPS system from restarting after a shutdown until an operator manually or remotely explicitly restarts it. If the UPS is in a startup or reboot countdown, then the UPS will not restart until that delay has been satisfied.(*)
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.1.1.18.8.5 snmpwalk -v2c -c public <target> GE-PARALLELUPS::upsAutoRestart_eighth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.818.1.1.18.8.5.1 snmpget -v2c -c public <target> GE-PARALLELUPS::upsAutoRestart_eighth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.818.1.1.18.8.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> upsAutoRestart_eighth.1
Start monitoring GE parallel-redundant UPS installation with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GE-PARALLELUPS::upsAutoRestart_eighth OID value, configure state conditions and alerts, and monitor any GE parallel-redundant UPS installation from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.818 | imv | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1 | geHardware | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1 | geUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.18 | geEighthUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.18.8 | upsControl_eighth | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.18.8.5 | upsAutoRestart_eighth | GE-PARALLELUPS |