GE-PARALLELUPS :: geModemStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › GE-PARALLELUPS › geModemStatus

geModemStatus

Module: GE-PARALLELUPS

OID (symbolic): GE-PARALLELUPS::geModemStatus

OID (numeric): 1.3.6.1.4.1.818.1.3.1

Node type: OBJECT-TYPE

Type: NonNegativeInteger32

Access: read-only

Description: The status of the modem, controlled by the addressed device. The status word is a collection of bits, as specified below. The SNMP value NOSUCHNAME means 'status not (yet) available'. 1 modemStatOnline. There is a valid online connection. 2 modemStatError. The last operation has failed. The device will clear this bit when a new modem command is received. 4 unused (should be defined = 0). 8 unused (should be defined = 0). 16 modemStatDialling. The dialling procedure is pending. 32 modemStatBusy. The device is performing some operation, and can not be accessed, temporarily. 64 unused (should be defined = 0). 128 modemStatNoModem. The modem is not connected or not responding. 256 modemStatDCD. The DCD line status signal is on. 512 modemStatRing. The RING line status signal is on. 1024 modemStatCTS. The CTS line status signal is on. 2048 modemStatDSR. The DSR line status signal is on. 4096 unused (should be defined = 0). 8192 unused (should be defined = 0). 16384 unused (should be defined = 0). 32768 unused (should be defined = 0).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.1.3.1
snmpwalk -v2c -c public <target> GE-PARALLELUPS::geModemStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.818.1.3.1.1
snmpget -v2c -c public <target> GE-PARALLELUPS::geModemStatus.1

Start monitoring GE parallel-redundant UPS installation with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GE-PARALLELUPS::geModemStatus OID value, configure state conditions and alerts, and monitor any GE parallel-redundant UPS installation from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.818imvGE-PARALLELUPS
1.3.6.1.4.1.818.1geHardwareGE-PARALLELUPS
1.3.6.1.4.1.818.1.3geModemGE-PARALLELUPS
1.3.6.1.4.1.818.1.3.1geModemStatusGE-PARALLELUPS