All MIBs › GDCUAS7624-MIB › uas7624LedStatus
uas7624LedStatus
Module: GDCUAS7624-MIB
OID (symbolic): GDCUAS7624-MIB::uas7624LedStatus
OID (numeric): 1.3.6.1.4.1.498.18.1.2.1.1.10
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Returns a bitwise snapshot of the front panel LED state.
based on the Line:
For SCinstance: [L]ine=1-4 [i]nterface=0
key
---
01 = SOLID GREEN Good Condition and in Sync
10 = SOLID RED Alarm State (no Current or no Sync)
11 = FLASHING GREEN Loop in Test
1.7 - n/a
1.6 - f/u
1.5 - 2^1
1.4 - 2^0 Loop 1 (01, 10, 11)
1.3 - f/u
1.2 - f/u
1.1 - 2^1
1.0 - 2^0 Loop 2 (01, 10, 11)
2.7 - f/u
2.6 - f/u
2.5 - f/u
2.4 - f/u
2.3 - 2^1
2.2 - 2^0 Loop 3 (01, 10, 11)
2.1 - f/u
2.0 - f/u
For SCinstance: [L]ine=5 [i]nterface=0
1.7 - n/a
1.6 - f/u
1.5 - f/u
1.4 - f/u
1.3 - f/u
1.2 - f/u
1.1 - f/u
1.0 - f/u
2.7 - n/a
2.6 - f/u
2.5 - Network AIS 1:RED (Alarm Indication Signal)
2.4 - Network LVC 1:RED (Line Code Violation)
2.3 - Network LOS 1:RED (Loss Of Signal)
2.2 - Network OOF 1:RED (Out Of Frame)
2.1 - ALARM 1: FLASHING RED (AIS, LVC, LOS, or OOF)
2.0 - Test Mode 1: RED (in test mode)
What is uas7624LedStatus?
This 2-byte bitmask reports the front-panel LED states, decoded differently depending on whether the addressed line is a loop (lines 1-4, where each 2-bit field shows solid green/solid red/flashing green per loop) or the T1 line (line 5, where individual bits flag AIS, LOS, LOF, alarm, and test-mode LEDs). An admin reads this to remotely see the same status a technician would see by looking at the front panel, without needing physical access to the chassis.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.18.1.2.1.1.10 snmpwalk -v2c -c public <target> GDCUAS7624-MIB::uas7624LedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.18.1.2.1.1.10.1 snmpget -v2c -c public <target> GDCUAS7624-MIB::uas7624LedStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> uas7624LedStatus.1
Start monitoring General DataComm (GDC) UAS7624 24-port universal access system/channel bank with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCUAS7624-MIB::uas7624LedStatus OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) UAS7624 24-port universal access system/channel bank from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | GDC7616-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.18 | niudiu | GDCUAS7624-MIB |
| 1.3.6.1.4.1.498.18.1 | uas7624System | GDCUAS7624-MIB |
| 1.3.6.1.4.1.498.18.1.2 | uas7624Maintenance | GDCUAS7624-MIB |
| 1.3.6.1.4.1.498.18.1.2.1 | uas7624MaintenanceTable | GDCUAS7624-MIB |
| 1.3.6.1.4.1.498.18.1.2.1.1 | uas7624MaintenanceEntry | GDCUAS7624-MIB |
| 1.3.6.1.4.1.498.18.1.2.1.1.10 | uas7624LedStatus | GDCUAS7624-MIB |