GDCUAS7624-MIB :: uas7624DiagConfig

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsGDCUAS7624-MIBuas7624DiagConfig

uas7624DiagConfig

Module: GDCUAS7624-MIB

OID (symbolic): GDCUAS7624-MIB::uas7624DiagConfig

OID (numeric): 1.3.6.1.4.1.498.18.1.4.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Selects test to run. (1) stops test.

SCinstance: stopTest(1) [L]ine=1-5 [i]nterface=0-3 lineLoopback(2) [L]ine=5 [i]nterface=0 payloadLoopback(3) [L]ine=5 [i]nterface=0 digitalLoopback(4) [L]ine=1-4 [i]nterface=1-3 selfTest(5) [L]ine=1-4 [i]nterface=1-3 rdl(6) [L]ine=1-4 [i]nterface=1-3 rdlSelfTest(7) [L]ine=1-4 [i]nterface=1-3

What is uas7624DiagConfig?

This read-write setting selects which diagnostic test to run on the addressed line/interface, such as lineLoopback, payloadLoopback, digitalLoopback, selfTest, rdl, or rdlSelfTest, or stopTest(1) to halt testing; the valid line/interface combination differs per test type. An admin writes a specific test value here to kick off, for example, a digital loopback on a loop interface, then writes stopTest to end it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.18.1.4.1.1.2
snmpwalk -v2c -c public <target> GDCUAS7624-MIB::uas7624DiagConfig

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.18.1.4.1.1.2.1
snmpget -v2c -c public <target> GDCUAS7624-MIB::uas7624DiagConfig.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.498.18.1.4.1.1.2.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> uas7624DiagConfig.1

Start monitoring General DataComm (GDC) UAS7624 24-port universal access system/channel bank with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCUAS7624-MIB::uas7624DiagConfig OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) UAS7624 24-port universal access system/channel bank from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.498gdcGDC7616-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498.18niudiuGDCUAS7624-MIB
1.3.6.1.4.1.498.18.1uas7624SystemGDCUAS7624-MIB
1.3.6.1.4.1.498.18.1.4uas7624DiagnosticsGDCUAS7624-MIB
1.3.6.1.4.1.498.18.1.4.1uas7624DiagTableGDCUAS7624-MIB
1.3.6.1.4.1.498.18.1.4.1.1uas7624DiagEntryGDCUAS7624-MIB
1.3.6.1.4.1.498.18.1.4.1.1.2uas7624DiagConfigGDCUAS7624-MIB