All MIBs › GDCDATX-MIB › datxEiaSyncClock
datxEiaSyncClock
Module: GDCDATX-MIB
OID (symbolic): GDCDATX-MIB::datxEiaSyncClock
OID (numeric): 1.3.6.1.4.1.498.7.1.3.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Control for the EIA sync clock
What is datxEiaSyncClock?
Enables or disables the EIA synchronous clock signal on the interface, used when the attached DTE needs the DATX unit to supply timing on the EIA connector.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.7.1.3.1.1.4 snmpwalk -v2c -c public <target> GDCDATX-MIB::datxEiaSyncClock
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.7.1.3.1.1.4.1 snmpget -v2c -c public <target> GDCDATX-MIB::datxEiaSyncClock.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.7.1.3.1.1.4.1 i <value>
Start monitoring General DataComm (GDC) DATX WAN multiplexer/data transmission unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCDATX-MIB::datxEiaSyncClock OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) DATX WAN multiplexer/data transmission unit from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.7 | datx | GDCDATX-MIB |
| 1.3.6.1.4.1.498.7.1 | datxSystem | GDCDATX-MIB |
| 1.3.6.1.4.1.498.7.1.3 | datxConfiguration | GDCDATX-MIB |
| 1.3.6.1.4.1.498.7.1.3.1 | datxTransConfigTable | GDCDATX-MIB |
| 1.3.6.1.4.1.498.7.1.3.1.1 | datxTransConfigEntry | GDCDATX-MIB |
| 1.3.6.1.4.1.498.7.1.3.1.1.4 | datxEiaSyncClock | GDCDATX-MIB |