GDC7616-MIB :: uas7616ResetMajorAlarm

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsGDC7616-MIBuas7616ResetMajorAlarm

uas7616ResetMajorAlarm

Module: GDC7616-MIB

OID (symbolic): GDC7616-MIB::uas7616ResetMajorAlarm

OID (numeric): 1.3.6.1.4.1.498.12.4.5.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable is used to reset alarm per Loop basis.

What is uas7616ResetMajorAlarm?

Writing reset(1) to this object clears the Major alarm condition on a per-loop basis; reading it back shows norm(2). A technician uses this after resolving the underlying fault to acknowledge and clear the Major alarm indication for that loop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.12.4.5.1.11
snmpwalk -v2c -c public <target> GDC7616-MIB::uas7616ResetMajorAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.12.4.5.1.11.1
snmpget -v2c -c public <target> GDC7616-MIB::uas7616ResetMajorAlarm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.498.12.4.5.1.11.1 i <value>

Start monitoring General DataComm (GDC) UAS 7616 multiplexer/access chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC7616-MIB::uas7616ResetMajorAlarm OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) UAS 7616 multiplexer/access chassis from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498gdcGDC7616-MIB
1.3.6.1.4.1.498.12bql2GDC7616-MIB
1.3.6.1.4.1.498.12.4uas7616GDC7616-MIB
1.3.6.1.4.1.498.12.4.5uas7616ControlTableGDC7616-MIB
1.3.6.1.4.1.498.12.4.5.1uas7616ControlEntryGDC7616-MIB
1.3.6.1.4.1.498.12.4.5.1.11uas7616ResetMajorAlarmGDC7616-MIB