All MIBs › GDC7616-MIB › uas7616LEDStatus
uas7616LEDStatus
Module: GDC7616-MIB
OID (symbolic): GDC7616-MIB::uas7616LEDStatus
OID (numeric): 1.3.6.1.4.1.498.12.4.5.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The GDC 7616 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - not used 1.5 - loop 1 channel A (00 = No Change 01 = Green Active) 1.4 - (10 = Red Solid 11 = RedFlashing ) 1.3 - loop 1 channel B (00 = No Change 01 = Green Active) 1.2 - (10 = Red Solid 11 = RedFlashing ) 1.1 - loop 2 channel A (00 = No Change 01 = Green Active) 1.0 - (10 = Red Solid 11 = RedFlashing )
2.7 - not used 2.6 - not used 2.5 - loop 2 channel B (00 = No Change 01 = Green Active) 2.4 - (10 = Red Solid 11 = RedFlashing ) 2.3 - loop 3 channel A (00 = No Change 01 = Green Active) 2.2 - (10 = Red Solid 11 = RedFlashing ) 2.1 - loop 3 channel B (00 = No Change 01 = Green Active) 2.0 - (10 = Red Solid 11 = RedFlashing )
3.7 - not used 3.6 - not used 3.5 - not used 3.4 - alarm led 3.3 - test mode led 3.2 - in service 3.1 - system timing source 3.0 - management response
What is uas7616LEDStatus?
This 3-byte OCTET STRING reports the state of every front-panel LED on the 7616 card, packed as 2-bit color codes (green active, red solid, red flashing) per loop/channel plus single bits for alarm, test-mode, in-service, timing-source, and management-response indicators. A technician would read this remotely to see the same status a person standing at the shelf would see just by looking at the card's lights.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.12.4.5.1.4 snmpwalk -v2c -c public <target> GDC7616-MIB::uas7616LEDStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.12.4.5.1.4.1 snmpget -v2c -c public <target> GDC7616-MIB::uas7616LEDStatus.1
Start monitoring General DataComm (GDC) UAS 7616 multiplexer/access chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC7616-MIB::uas7616LEDStatus OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) UAS 7616 multiplexer/access chassis from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498 | gdc | GDC7616-MIB |
| 1.3.6.1.4.1.498.12 | bql2 | GDC7616-MIB |
| 1.3.6.1.4.1.498.12.4 | uas7616 | GDC7616-MIB |
| 1.3.6.1.4.1.498.12.4.5 | uas7616ControlTable | GDC7616-MIB |
| 1.3.6.1.4.1.498.12.4.5.1 | uas7616ControlEntry | GDC7616-MIB |
| 1.3.6.1.4.1.498.12.4.5.1.4 | uas7616LEDStatus | GDC7616-MIB |