GDC-SC800T3-MIB :: sc800t3TIMLOS

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsGDC-SC800T3-MIBsc800t3TIMLOS

sc800t3TIMLOS

Module: GDC-SC800T3-MIB

OID (symbolic): GDC-SC800T3-MIB::sc800t3TIMLOS

OID (numeric): 1.3.6.1.4.1.498.19.1.8.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Disables or enables the alarm on the Major buss or Minor buss.

What is sc800t3TIMLOS?

Enables or disables reporting of a timing-loss condition on this card, and if enabled, routes it to the major or minor alarm bus. Admins enable this so loss of the reference clock source is flagged for immediate attention.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.19.1.8.1.1.4
snmpwalk -v2c -c public <target> GDC-SC800T3-MIB::sc800t3TIMLOS

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.19.1.8.1.1.4.1
snmpget -v2c -c public <target> GDC-SC800T3-MIB::sc800t3TIMLOS.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.498.19.1.8.1.1.4.1 i <value>

Start monitoring General DataComm (GDC) SC800 T3 channel-service unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-SC800T3-MIB::sc800t3TIMLOS OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) SC800 T3 channel-service unit from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.498gdcGDC7616-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498.19ds3GDC-SC800T3-MIB
1.3.6.1.4.1.498.19.1sc800t3GDC-SC800T3-MIB
1.3.6.1.4.1.498.19.1.8sc800t3LocalAlarmsGDC-SC800T3-MIB
1.3.6.1.4.1.498.19.1.8.1sc800t3LocalAlarmConfigTableGDC-SC800T3-MIB
1.3.6.1.4.1.498.19.1.8.1.1sc800t3LocalAlarmConfigEntryGDC-SC800T3-MIB
1.3.6.1.4.1.498.19.1.8.1.1.4sc800t3TIMLOSGDC-SC800T3-MIB