All MIBs › GDC-SC800T3-MIB › sc800t3SoftReset
sc800t3SoftReset
Module: GDC-SC800T3-MIB
OID (symbolic): GDC-SC800T3-MIB::sc800t3SoftReset
OID (numeric): 1.3.6.1.4.1.498.19.1.4.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Supports the action of soft resetting the unit. When this object is set to reset(1), then the unit performs a soft reset. The value norm will be returned when the reset is complete. The value of norm can not be set by management.
What is sc800t3SoftReset?
Setting this to reset(2) performs a soft (software) reset of the unit; it reports norm(1) again once the reset completes, and that normal value cannot be set directly. Admins use this to recover a hung card without a physical power cycle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.19.1.4.1.1.3 snmpwalk -v2c -c public <target> GDC-SC800T3-MIB::sc800t3SoftReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.19.1.4.1.1.3.1 snmpget -v2c -c public <target> GDC-SC800T3-MIB::sc800t3SoftReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.19.1.4.1.1.3.1 i <value>
Start monitoring General DataComm (GDC) SC800 T3 channel-service unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-SC800T3-MIB::sc800t3SoftReset OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) SC800 T3 channel-service unit from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | GDC7616-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.19 | ds3 | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1 | sc800t3 | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.4 | sc800t3Maintenance | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.4.1 | sc800t3MaintenanceTable | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.4.1.1 | sc800t3MaintenanceEntry | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.4.1.1.3 | sc800t3SoftReset | GDC-SC800T3-MIB |