All MIBs › GDC-SC800T3-MIB › sc800t3InbandLoopback
sc800t3InbandLoopback
Module: GDC-SC800T3-MIB
OID (symbolic): GDC-SC800T3-MIB::sc800t3InbandLoopback
OID (numeric): 1.3.6.1.4.1.498.19.1.2.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables/disables the inband loop back.
What is sc800t3InbandLoopback?
Enables or disables support for in-band (code-based) loopback activation on the DS3 line. Admins enable it so a far-end test set can trigger a loopback using in-band codes rather than requiring SNMP or a local craft interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.19.1.2.2.1.9 snmpwalk -v2c -c public <target> GDC-SC800T3-MIB::sc800t3InbandLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.19.1.2.2.1.9.1 snmpget -v2c -c public <target> GDC-SC800T3-MIB::sc800t3InbandLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.19.1.2.2.1.9.1 i <value>
Start monitoring General DataComm (GDC) SC800 T3 channel-service unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-SC800T3-MIB::sc800t3InbandLoopback OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) SC800 T3 channel-service unit from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | GDC7616-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.19 | ds3 | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1 | sc800t3 | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.2 | sc800t3Configuration | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.2.2 | sc800t3NetworkConfigTable | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.2.2.1 | sc800t3NetworkConfigEntry | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.2.2.1.9 | sc800t3InbandLoopback | GDC-SC800T3-MIB |