All MIBs › GDC-SC800T3-MIB › sc800t3DiagTestDuration
sc800t3DiagTestDuration
Module: GDC-SC800T3-MIB
OID (symbolic): GDC-SC800T3-MIB::sc800t3DiagTestDuration
OID (numeric): 1.3.6.1.4.1.498.19.1.3.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Selects the duration to run a diagnostic test.
What is sc800t3DiagTestDuration?
Selects how long a diagnostic test (such as a loopback or BER test) should run, from 30 seconds up to 30 minutes, or testTimeInfinite(16) to run until manually stopped. Admins set a bounded duration like testTime5Mins(6) so a test automatically clears instead of leaving the circuit looped indefinitely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.19.1.3.1.1.2 snmpwalk -v2c -c public <target> GDC-SC800T3-MIB::sc800t3DiagTestDuration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.19.1.3.1.1.2.1 snmpget -v2c -c public <target> GDC-SC800T3-MIB::sc800t3DiagTestDuration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.19.1.3.1.1.2.1 i <value>
Start monitoring General DataComm (GDC) SC800 T3 channel-service unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-SC800T3-MIB::sc800t3DiagTestDuration OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) SC800 T3 channel-service unit from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | GDC7616-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.19 | ds3 | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1 | sc800t3 | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.3 | sc800t3Diagnostics | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.3.1 | sc800t3DiagTable | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.3.1.1 | sc800t3DiagEntry | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.3.1.1.2 | sc800t3DiagTestDuration | GDC-SC800T3-MIB |