All MIBs › GDC-SC800T3-MIB › sc800t3DiagT3Test
sc800t3DiagT3Test
Module: GDC-SC800T3-MIB
OID (symbolic): GDC-SC800T3-MIB::sc800t3DiagT3Test
OID (numeric): 1.3.6.1.4.1.498.19.1.3.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A set of 2-11 starts the specified test and a set of t3NoTest(1) stops the current running test. A get returns the current active test.
What is sc800t3DiagT3Test?
Starts or stops a specific DS3-level test such as line loopback, payload loopback, local loopback, or remote loopback (only available in C-bit parity mode); setting t3NoTest(1) stops whatever test is running, and reading the object returns the currently active test. Admins use this to run t3LineLoopback(2) toward the network when isolating a circuit fault to the local card versus the carrier.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.19.1.3.1.1.4 snmpwalk -v2c -c public <target> GDC-SC800T3-MIB::sc800t3DiagT3Test
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.19.1.3.1.1.4.1 snmpget -v2c -c public <target> GDC-SC800T3-MIB::sc800t3DiagT3Test.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.19.1.3.1.1.4.1 i <value>
Start monitoring General DataComm (GDC) SC800 T3 channel-service unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-SC800T3-MIB::sc800t3DiagT3Test OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) SC800 T3 channel-service unit from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | GDC7616-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.19 | ds3 | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1 | sc800t3 | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.3 | sc800t3Diagnostics | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.3.1 | sc800t3DiagTable | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.3.1.1 | sc800t3DiagEntry | GDC-SC800T3-MIB |
| 1.3.6.1.4.1.498.19.1.3.1.1.4 | sc800t3DiagT3Test | GDC-SC800T3-MIB |