All MIBs › GDC-SC553-MIB › sc553SwitchActiveFirmware
sc553SwitchActiveFirmware
Module: GDC-SC553-MIB
OID (symbolic): GDC-SC553-MIB::sc553SwitchActiveFirmware
OID (numeric): 1.3.6.1.4.1.498.6.11.1.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to switch the active executing firmware from the version in sc553ActiveRev to the version in sc553StoredRev.
When a switchActive(2) is set (write only) the element will: 1) reboot 2) uncompress stored code into active area 3) perform checksum on active area 4) Set sc553StoredStatus object to indicate results 5) If succesfull: update sc553ActiveFirmwareRev and sc553StoredFirmwareRev and begin executing If failed: replace active area with previous revision
The switchNorm(1) enumeration will always be read.
Setting switchActive(2) when the sc553StoredStatus is not statOK(3) will result in an error.
What is sc553SwitchActiveFirmware?
Read-write control that, when set to switchActive(2), tells the unit to reboot, decompress the stored firmware into the active area, verify its checksum, and start running it; switchNorm(1) is always what's read back, and the set fails unless sc553StoredFirmwareStatus is already statOK(3).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.6.11.1.2.1.6 snmpwalk -v2c -c public <target> GDC-SC553-MIB::sc553SwitchActiveFirmware
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.6.11.1.2.1.6.1 snmpget -v2c -c public <target> GDC-SC553-MIB::sc553SwitchActiveFirmware.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.6.11.1.2.1.6.1 i <value>
Start monitoring General DataComm (GDC) SC553 channel-service unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-SC553-MIB::sc553SwitchActiveFirmware OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) SC553 channel-service unit from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.6 | dsx1 | GDC-5553-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.6.11 | sc553 | GDC-SC553-MIB |
| 1.3.6.1.4.1.498.6.11.1 | sc553Version | GDC-SC553-MIB |
| 1.3.6.1.4.1.498.6.11.1.2 | sc553VersionTable | GDC-SC553-MIB |
| 1.3.6.1.4.1.498.6.11.1.2.1 | sc553VersionEntry | GDC-SC553-MIB |
| 1.3.6.1.4.1.498.6.11.1.2.1.6 | sc553SwitchActiveFirmware | GDC-SC553-MIB |