All MIBs › GDC-DSU-MGMT-MIB › gdcDsuChannelTestStatus
gdcDsuChannelTestStatus
Module: GDC-DSU-MGMT-MIB
OID (symbolic): GDC-DSU-MGMT-MIB::gdcDsuChannelTestStatus
OID (numeric): 1.3.6.1.4.1.498.8.5.4.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The current execution status of the diagnostic test. The value testRunning(1) indicates that a diagnostic test is running. The value testComplete(2) indicates that no diagnostic test is running and that the results are available in gdcDsuChannelTestExceptions and gdcDsuChannelTestResults. The value testBeingConfigured(3) indicates that no diagnostic test is running and that the configuration of a new diagnostic test has been initiated and as such the results may be invalid.
This object works with the gdcDsuChannelSendCode object. Whenever a test is initiated by gdcDsuChannelSendCode, then the value of this object is set to testRunning(1).
This object also works with the gdcDsuChannelLoopbackConfig, gdcDsuChannelProgPattern, gdcDsuChannelRemoteLoopback, and gdcDsuChannelTestDuration objects. Whenever these variables are set, then the value of this object is set to testBeingConfigured(3).
What is gdcDsuChannelTestStatus?
Reports the current execution state of a diagnostic test on this channel: testInProgress(2) while a test set via gdcDsuChannelDiagSendCode is running, testCompleted(4)/testCompletedNotInTest(5) once it finishes with results available in gdcDsuChannelTestResults, or notInTest(1) when idle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.5.4.1.7 snmpwalk -v2c -c public <target> GDC-DSU-MGMT-MIB::gdcDsuChannelTestStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.5.4.1.7.1 snmpget -v2c -c public <target> GDC-DSU-MGMT-MIB::gdcDsuChannelTestStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.5.4.1.7.1 i <value>
Start monitoring General DataComm (GDC) DSU (Digital Service Unit) equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-DSU-MGMT-MIB::gdcDsuChannelTestStatus OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) DSU (Digital Service Unit) equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.8 | dsu | DDS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.8.5 | t1 | GDC-DSU-MGMT-MIB |
| 1.3.6.1.4.1.498.8.5.4 | gdcDsuChannelDiagTable | GDC-DSU-MGMT-MIB |
| 1.3.6.1.4.1.498.8.5.4.1 | gdcDsuChannelDiagEntry | GDC-DSU-MGMT-MIB |
| 1.3.6.1.4.1.498.8.5.4.1.7 | gdcDsuChannelTestStatus | GDC-DSU-MGMT-MIB |