All MIBs › Finisher-MIB › finSupplyMediaInputMediaThickness
finSupplyMediaInputMediaThickness
Module: Finisher-MIB
OID (symbolic): Finisher-MIB::finSupplyMediaInputMediaThickness
OID (numeric): 1.3.6.1.2.1.43.32.1.1.14
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object identifies the thickness of the input media processed by this document input subunit measured in micrometers. This value may be used by devices (or operators) to set up proper machine tolerances for the feeder operation. The value (-2) indicates that the media thickness is unknown or not used in the setup for this input subunit.
What is finSupplyMediaInputMediaThickness?
The thickness of the media loaded in this finisher input, measured in micrometers, used by the device or an operator to set correct feeder tolerances; -2 means the thickness is unknown or not used in this input's setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.32.1.1.14 snmpwalk -v2c -c public <target> Finisher-MIB::finSupplyMediaInputMediaThickness
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.32.1.1.14.1 snmpget -v2c -c public <target> Finisher-MIB::finSupplyMediaInputMediaThickness.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.32.1.1.14.1 i <value>
Start monitoring Vendor-neutral network printer/MFP with finishing accessories, any manufacturer (RFC 3806) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Finisher-MIB::finSupplyMediaInputMediaThickness OID value, configure state conditions and alerts, and monitor any Vendor-neutral network printer/MFP with finishing accessories, any manufacturer (RFC 3806) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43.32 | finSupplyMediaInput | Finisher-MIB |
| 1.3.6.1.2.1.43.32.1 | finSupplyMediaInputTable | Finisher-MIB |
| 1.3.6.1.2.1.43.32.1.1 | finSupplyMediaInputEntry | Finisher-MIB |
| 1.3.6.1.2.1.43.32.1.1.14 | finSupplyMediaInputMediaThickness | Finisher-MIB |