All MIBs › Finisher-MIB › finSupplyMediaInputMediaDimXFeedDir
finSupplyMediaInputMediaDimXFeedDir
Module: Finisher-MIB
OID (symbolic): Finisher-MIB::finSupplyMediaInputMediaDimXFeedDir
OID (numeric): 1.3.6.1.2.1.43.32.1.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object provides the value of the dimension across the feed direction of the media that is placed or will be placed in this input device. The cross feed direction is ninety degrees relative to the feed direction on this device and measured in finSupplyMediaInputDimUnits. If this input device can reliably sense this value, the value is sensed and is read-only access. Otherwise the value is read-write access and may be written by management or control panel applications. The value (-1) means other and specifically indicates that this device places no
restrictions on this parameter. The value (-2) indicates unknown.
What is finSupplyMediaInputMediaDimXFeedDir?
The dimension, measured in finSupplyMediaInputDimUnit, of the media in this input across (90 degrees from) the feed direction; the device reports it read-only if it can sense it, with -1 meaning no restriction and -2 meaning unknown.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.32.1.1.7 snmpwalk -v2c -c public <target> Finisher-MIB::finSupplyMediaInputMediaDimXFeedDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.32.1.1.7.1 snmpget -v2c -c public <target> Finisher-MIB::finSupplyMediaInputMediaDimXFeedDir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.32.1.1.7.1 i <value>
Start monitoring Vendor-neutral network printer/MFP with finishing accessories, any manufacturer (RFC 3806) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Finisher-MIB::finSupplyMediaInputMediaDimXFeedDir OID value, configure state conditions and alerts, and monitor any Vendor-neutral network printer/MFP with finishing accessories, any manufacturer (RFC 3806) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43.32 | finSupplyMediaInput | Finisher-MIB |
| 1.3.6.1.2.1.43.32.1 | finSupplyMediaInputTable | Finisher-MIB |
| 1.3.6.1.2.1.43.32.1.1 | finSupplyMediaInputEntry | Finisher-MIB |
| 1.3.6.1.2.1.43.32.1.1.7 | finSupplyMediaInputMediaDimXFeedDir | Finisher-MIB |