All MIBs › Fibronics-EtherSwitch-MIB › fibEsReset
fibEsReset
Module: Fibronics-EtherSwitch-MIB
OID (symbolic): Fibronics-EtherSwitch-MIB::fibEsReset
OID (numeric): 1.3.6.1.4.1.22.101.9.1.2.1.1.1.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to reset the switch. Writing softReset(3) causes the switch to reset the hardware, run quick diagnostics, clear all counters, start switching, issue a warmstart trap, and then be able to respond to SNMP requests. Writing hardReset(4) causes the switch to run power up diagnostics and then execute a soft reset. Note: all address tables are cleared in both cases. The administrative parameters from nonvolatile memory are used to initialize the operational parameters. The value returned on GETs should be running(2) or other(1), which is used to indicate any other condition.
What is fibEsReset?
Lets an admin remotely reset the switch: writing softReset(3) clears counters and address tables, runs quick diagnostics, and restarts switching with a warmstart trap, while hardReset(4) additionally runs power-up diagnostics before performing the same soft reset; a GET always returns running(2) or other(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.101.9.1.2.1.1.1.2.5 snmpwalk -v2c -c public <target> Fibronics-EtherSwitch-MIB::fibEsReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.101.9.1.2.1.1.1.2.5.1 snmpget -v2c -c public <target> Fibronics-EtherSwitch-MIB::fibEsReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.101.9.1.2.1.1.1.2.5.1 i <value>
Start monitoring Fibronics EtherSwitch LAN switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fibronics-EtherSwitch-MIB::fibEsReset OID value, configure state conditions and alerts, and monitor any Fibronics EtherSwitch LAN switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| 1.3.6.1.4.1.22.101 | mibs | ESM-snmp |
| 1.3.6.1.4.1.22.101.9 | mibsbridges | ESM-snmp |
| 1.3.6.1.4.1.22.101.9.1 | mibbridges_specific | ESM-snmp |
| 1.3.6.1.4.1.22.101.9.1.2 | mibeth2eth | ESM-snmp |
| 1.3.6.1.4.1.22.101.9.1.2.1 | mib_xm516 | ESM-snmp |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.101.9.1.2.1.1 | fibEsObjects | Fibronics-EtherSwitch-MIB |
| 1.3.6.1.4.1.22.101.9.1.2.1.1.1 | fibEsMain | Fibronics-EtherSwitch-MIB |
| 1.3.6.1.4.1.22.101.9.1.2.1.1.1.2 | fibEsSys | Fibronics-EtherSwitch-MIB |
| 1.3.6.1.4.1.22.101.9.1.2.1.1.1.2.5 | fibEsReset | Fibronics-EtherSwitch-MIB |