FSM7326-ROUTING-MIB :: agentRouterRipSplitHorizonMode

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › FSM7326-ROUTING-MIB › agentRouterRipSplitHorizonMode

agentRouterRipSplitHorizonMode

Module: FSM7326-ROUTING-MIB

OID (symbolic): FSM7326-ROUTING-MIB::agentRouterRipSplitHorizonMode

OID (numeric): 1.3.6.1.4.1.4526.1.9.2.3.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).

What is agentRouterRipSplitHorizonMode?

Selects RIP's split-horizon behavior: none(1) disables split-horizon processing entirely, simple(2) (the default) withholds routes back out the interface they were learned on, and poisonReverse(3) advertises those routes back with an infinite metric. An admin troubleshooting RIP routing loops on a hub-and-spoke topology might switch this to poisonReverse for stronger loop prevention at the cost of extra advertised routes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.1.9.2.3.2
snmpwalk -v2c -c public <target> FSM7326-ROUTING-MIB::agentRouterRipSplitHorizonMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.1.9.2.3.2.1
snmpget -v2c -c public <target> FSM7326-ROUTING-MIB::agentRouterRipSplitHorizonMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.1.9.2.3.2.1 i <value>

Start monitoring Netgear FSM7326 managed switch (Layer 3 routing: OSPF/RIP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FSM7326-ROUTING-MIB::agentRouterRipSplitHorizonMode OID value, configure state conditions and alerts, and monitor any Netgear FSM7326 managed switch (Layer 3 routing: OSPF/RIP) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.1snmpManagedSwitchFSM726S-MIB
1.3.6.1.4.1.4526.1.9fsm7326FSM7326-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.1.9.2fsm7326RoutingFSM7326-ROUTING-MIB
1.3.6.1.4.1.4526.1.9.2.3agentRouterRipConfigGroupFSM7326-ROUTING-MIB
1.3.6.1.4.1.4526.1.9.2.3.2agentRouterRipSplitHorizonModeFSM7326-ROUTING-MIB