All MIBs › FOUNDRY-SN-OSPF-GROUP-MIB › snOspfNbrOptions
snOspfNbrOptions
Module: FOUNDRY-SN-OSPF-GROUP-MIB
OID (symbolic): FOUNDRY-SN-OSPF-GROUP-MIB::snOspfNbrOptions
OID (numeric): 1.3.6.1.4.1.1991.1.2.4.7.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A Bit Mask corresponding to the neighbor's op- tions field.
Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area.
Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF.
Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.
What is snOspfNbrOptions?
A bitmask of OSPF capability flags this neighbor advertised in its Hello/DBD packets: bit 0 for non-zero TOS metric support, bit 1 for accepting external routing information (vs. being in a stub area), bit 2 for multicast OSPF support, and bit 3 for NSSA support. Admins check this when diagnosing why a neighbor isn't receiving external routes, since a stub-area mismatch shows up here as a missing bit 1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.4.7.1.1.6 snmpwalk -v2c -c public <target> FOUNDRY-SN-OSPF-GROUP-MIB::snOspfNbrOptions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.4.7.1.1.6.1 snmpget -v2c -c public <target> FOUNDRY-SN-OSPF-GROUP-MIB::snOspfNbrOptions.1
Start monitoring Brocade/Foundry FastIron/NetIron router/L3 switch (OSPF extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-SN-OSPF-GROUP-MIB::snOspfNbrOptions OID value, configure state conditions and alerts, and monitor any Brocade/Foundry FastIron/NetIron router/L3 switch (OSPF extensions) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1991 | foundry | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1 | products | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2 | router | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2.4 | snOspf | FOUNDRY-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1991.1.2.4.7 | snOspfNbr | FOUNDRY-SN-OSPF-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.2.4.7.1 | snOspfNbrTable | FOUNDRY-SN-OSPF-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1 | snOspfNbrEntry | FOUNDRY-SN-OSPF-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.6 | snOspfNbrOptions | FOUNDRY-SN-OSPF-GROUP-MIB |