FOUNDRY-SN-IP-MIB :: snRtIpRipFiltOnAllPort

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsFOUNDRY-SN-IP-MIBsnRtIpRipFiltOnAllPort

snRtIpRipFiltOnAllPort

Module: FOUNDRY-SN-IP-MIB

OID (symbolic): FOUNDRY-SN-IP-MIB::snRtIpRipFiltOnAllPort

OID (numeric): 1.3.6.1.4.1.1991.1.2.3.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/from all interfaces. Prior to sending this command, snRtIpRipGblFiltList must have been set to a proper filter list.

The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports.

If set operation failed, then a SET with value of (2) or (3) returns error code 'GenError'. If succeed, entries in the filter list are deleted immediately.

The following values can be returned on reads: valid(1)....set operation is done and is valid.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.3.1.7
snmpwalk -v2c -c public <target> FOUNDRY-SN-IP-MIB::snRtIpRipFiltOnAllPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.3.1.7.1
snmpget -v2c -c public <target> FOUNDRY-SN-IP-MIB::snRtIpRipFiltOnAllPort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.2.3.1.7.1 i <value>

Start monitoring Brocade/Foundry FastIron Layer 3 switch (IPv4 routing/ARP/forwarding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-SN-IP-MIB::snRtIpRipFiltOnAllPort OID value, configure state conditions and alerts, and monitor any Brocade/Foundry FastIron Layer 3 switch (IPv4 routing/ARP/forwarding) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1991foundryFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1productsFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1.2routerFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1.2.3snRipFOUNDRY-SN-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1991.1.2.3.1snRtIpRipGeneralFOUNDRY-SN-IP-MIB
1.3.6.1.4.1.1991.1.2.3.1.7snRtIpRipFiltOnAllPortFOUNDRY-SN-IP-MIB