FOUNDRY-SN-IP-MIB :: snDvmrpDefaultRoute

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsFOUNDRY-SN-IP-MIBsnDvmrpDefaultRoute

snDvmrpDefaultRoute

Module: FOUNDRY-SN-IP-MIB

OID (symbolic): FOUNDRY-SN-IP-MIB::snDvmrpDefaultRoute

OID (numeric): 1.3.6.1.4.1.1991.1.2.5.1.12

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this default route will be used for multicast forwarding. snDvmrpEnable must be 'enabled' before this object is writen.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.5.1.12
snmpwalk -v2c -c public <target> FOUNDRY-SN-IP-MIB::snDvmrpDefaultRoute

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.5.1.12.1
snmpget -v2c -c public <target> FOUNDRY-SN-IP-MIB::snDvmrpDefaultRoute.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.2.5.1.12.1 a <value>

Start monitoring Brocade/Foundry FastIron Layer 3 switch (IPv4 routing/ARP/forwarding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-SN-IP-MIB::snDvmrpDefaultRoute OID value, configure state conditions and alerts, and monitor any Brocade/Foundry FastIron Layer 3 switch (IPv4 routing/ARP/forwarding) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1991foundryFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1productsFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1.2routerFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1.2.5snDvmrpFOUNDRY-SN-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1991.1.2.5.1snDvmrpMIBObjectsFOUNDRY-SN-IP-MIB
1.3.6.1.4.1.1991.1.2.5.1.12snDvmrpDefaultRouteFOUNDRY-SN-IP-MIB