Description: ICMP Message Code value. Used in combination with
ICMP Message Type (use snAgAclSourceOperand2) to
setup an ICMP filter. This object is not used with any
other protocol. 0 means NA.
Supported values
Type: Echo reply
--------------
1 = Echo reply
Type: Destination unreachable
-------------------------
1 = Network unreachable
2 = Host unreachable
3 = Protocol unreachable
4 = Port unreachable
5 = Fragmentation needed by don't fragment bit set
6 = Source route failed
7 = Destination network unknown
8 = Destination host unknown
9 = Source host isolated
10 = Destination network administratively prohibited
11=Destination host administratively prohibited
12=Network unreachable for TOS
13=Host unreachable for TOS
14=Communication administratively prohibited by filter
15=Host precedence violation
16=Precedence cutoff in effect
Type: Source quench
------------------
1 = Source quench
Type: Redirect
------------
1 = Redirect for network
2 = Redirect for host
3 = Redirect for TOS and network
4 = Redirect for TOS and host
Type: Echo request
-----------------
1 = Echo request
Type: Router advertisement
------------------------
1 = Router advertisement
Type: Router solicitation
---------------------
1 = Router solicitation
Type: Time exceeded
------------------
1 = Time to live equals 0 during transmit
2 = Time to live equals 0 during reassembly
Type: Parameter problem
---------------------
1 = IP header bad (catchall error)
2 = Required option missing
Type: Timestamp request
----------------------
1 = Timestamp request
Type: Timestamp reply
-------------------
1 = Timestamp reply
Type: Information request
----------------------
1 = Information request
Type: Information reply
--------------------
1 = Information reply
Type: Address mask request
------------------------
1 = Address mask request
Type: Address mask reply
----------------------
1 = Address mask reply