All MIBs › FMS100-MIB › pa100RptrStackCardTypeInfo
pa100RptrStackCardTypeInfo
Module: FMS100-MIB
OID (symbolic): FMS100-MIB::pa100RptrStackCardTypeInfo
OID (numeric): 1.3.6.1.4.1.43.19.3.1.1.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Supplies the information about the type of Cards in the repeater stack. There is one octet for each unit in the stack. Each octet can have the following values:
0 : undetected(power off or non-exist) 1 : repeater card 2 : management unit 3 : bridge/management card 4 : backup management(/bridge) card 5 : powered off 6 : unknown Value 0 indicates either the powered off card's cardindex is higher than all of the powered on cards or the card is non-existant. Value 5 indicates that the card is powered off and there are powered on card(s) with higher index number.
Octet offset(started 0) N indicates N+1 th card information. I.e. The first octet indicates card 1's information.
What is pa100RptrStackCardTypeInfo?
A read-only octet string, one to eight bytes, where each byte reports the type of card installed at the corresponding position in the repeater stack, using codes such as 1=repeater card, 2=management unit, 3=bridge/management card, or 5=powered off. This gives an admin a compact way to inventory an entire repeater stack's hardware composition and power state in a single SNMP read, useful for remotely confirming which slots hold management or bridge cards versus plain repeater cards. A returned value of hex 02 01 01 05 would mean stack unit 1 has a management unit, units 2 and 3 have repeater cards, and unit 4 is powered off.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.19.3.1.1.1.3 snmpwalk -v2c -c public <target> FMS100-MIB::pa100RptrStackCardTypeInfo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.19.3.1.1.1.3.1 snmpget -v2c -c public <target> FMS100-MIB::pa100RptrStackCardTypeInfo.1
Start monitoring 3Com LinkBuilder FMS100 100Mb Ethernet hub/repeater (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FMS100-MIB::pa100RptrStackCardTypeInfo OID value, configure state conditions and alerts, and monitor any 3Com LinkBuilder FMS100 100Mb Ethernet hub/repeater (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.19 | linkBuilderFMS100_mib | A3Com-products-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.19.3 | pa100RptrSpecific | FMS100-MIB |
| 1.3.6.1.4.1.43.19.3.1 | pa100RptrInfo | FMS100-MIB |
| 1.3.6.1.4.1.43.19.3.1.1 | pa100RptrTable | FMS100-MIB |
| 1.3.6.1.4.1.43.19.3.1.1.1 | pa100RptrEntry | FMS100-MIB |
| 1.3.6.1.4.1.43.19.3.1.1.1.3 | pa100RptrStackCardTypeInfo | FMS100-MIB |