FIBRONICS-MIB :: lseGroupBackBone

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › FIBRONICS-MIB › lseGroupBackBone

lseGroupBackBone

Module: FIBRONICS-MIB

OID (symbolic): FIBRONICS-MIB::lseGroupBackBone

OID (numeric): 1.3.6.1.4.1.22.101.2.2.19.1.1.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The board is in the Backbone Mode. lse208 - upper subgroup is RX only (ports 1-4) and lower subgroup is TX to line only. lse808 - the first port is RX from line only, the second - TX to line only, the rest are in regular 10BaseT mode.

What is lseGroupBackBone?

Enables Backbone Mode on this LAN-switch (LSE) module, where port roles are fixed for pass-through traffic: on the lse208, the upper subgroup (ports 1-4) becomes receive-only and the lower subgroup becomes transmit-only to the line; on the lse808, port 1 is receive-only from the line, port 2 is transmit-only, and the remaining ports operate in normal 10BaseT mode. An admin enables this specifically when using an LSE208 or LSE808 module as a dedicated backbone repeater rather than a normal multi-port hub.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.101.2.2.19.1.1.1.11
snmpwalk -v2c -c public <target> FIBRONICS-MIB::lseGroupBackBone

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.101.2.2.19.1.1.1.11.1
snmpget -v2c -c public <target> FIBRONICS-MIB::lseGroupBackBone.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22.101.2.2.19.1.1.1.11.1 i <value>

Start monitoring Fibronics multi-protocol LAN chassis hub (legacy, enterprise root MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FIBRONICS-MIB::lseGroupBackBone OID value, configure state conditions and alerts, and monitor any Fibronics multi-protocol LAN chassis hub (legacy, enterprise root MIB) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22spartacusCMU-MIB
1.3.6.1.4.1.22.101mibsESM-snmp
1.3.6.1.4.1.22.101.2mibsstack_rptrsESM-snmp
Numeric OIDNameModule
1.3.6.1.4.1.22.101.2.2fbrStackFIBRONICS-MIB
1.3.6.1.4.1.22.101.2.2.19fbrLanSwitchFIBRONICS-MIB
1.3.6.1.4.1.22.101.2.2.19.1lseFIBRONICS-MIB
1.3.6.1.4.1.22.101.2.2.19.1.1lseGroupTableFIBRONICS-MIB
1.3.6.1.4.1.22.101.2.2.19.1.1.1lseGroupEntryFIBRONICS-MIB
1.3.6.1.4.1.22.101.2.2.19.1.1.1.11lseGroupBackBoneFIBRONICS-MIB