All MIBs › FASTPATH-ROUTING-MIB › agentRouterRipSplitHorizonMode
agentRouterRipSplitHorizonMode
Module: FASTPATH-ROUTING-MIB
OID (symbolic): FASTPATH-ROUTING-MIB::agentRouterRipSplitHorizonMode
OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).
What is agentRouterRipSplitHorizonMode?
Selects RIP's split-horizon loop-prevention technique: none(1) disables it entirely, simple(2) (the default) suppresses advertising a route back out the interface it was learned on, and poisonReverse(3) instead advertises it back with an infinite metric, converging faster after a link failure at the cost of extra update traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.2 snmpwalk -v2c -c public <target> FASTPATH-ROUTING-MIB::agentRouterRipSplitHorizonMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.2.1 snmpget -v2c -c public <target> FASTPATH-ROUTING-MIB::agentRouterRipSplitHorizonMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.2.1 i <value>
Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (IPv4 routing: OSPF/RIP/VRRP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FASTPATH-ROUTING-MIB::agentRouterRipSplitHorizonMode OID value, configure state conditions and alerts, and monitor any Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (IPv4 routing: OSPF/RIP/VRRP) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000 | dellLanStandard | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2 | dellLanExtension | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132 | lvl7 | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1 | lvl7Products | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1 | fastPath | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2 | fastPathRouting | DNOS-ROUTING-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3 | agentRouterRipConfigGroup | DNOS-ROUTING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.2 | agentRouterRipSplitHorizonMode | FASTPATH-ROUTING-MIB |