FASTPATH-ROUTING-MIB :: agentRouterRipAutoSummaryMode

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › FASTPATH-ROUTING-MIB › agentRouterRipAutoSummaryMode

agentRouterRipAutoSummaryMode

Module: FASTPATH-ROUTING-MIB

OID (symbolic): FASTPATH-ROUTING-MIB::agentRouterRipAutoSummaryMode

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever possible into aggregates. When set to disable(2), routes are not aggregated in RIP updates generated by this router. The default auto summary mode is enable(1).

What is agentRouterRipAutoSummaryMode?

Controls whether RIP automatically summarizes subnet routes into their classful network boundaries when advertising; enabled by default, disabling it lets RIP advertise the specific subnets instead, needed in discontiguous or heavily subnetted networks.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.3
snmpwalk -v2c -c public <target> FASTPATH-ROUTING-MIB::agentRouterRipAutoSummaryMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.3.1
snmpget -v2c -c public <target> FASTPATH-ROUTING-MIB::agentRouterRipAutoSummaryMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.3.1 i <value>

Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (IPv4 routing: OSPF/RIP/VRRP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FASTPATH-ROUTING-MIB::agentRouterRipAutoSummaryMode OID value, configure state conditions and alerts, and monitor any Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (IPv4 routing: OSPF/RIP/VRRP) from a single console.

OID Breakdown

Upper-level ancestors (15 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2fastPathRoutingDNOS-ROUTING-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3agentRouterRipConfigGroupDNOS-ROUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.3.3agentRouterRipAutoSummaryModeFASTPATH-ROUTING-MIB