FASTPATH-DHCPSERVER-PRIVATE-MIB :: agentDhcpServerExcludedAddressRangeStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsFASTPATH-DHCPSERVER-PRIVATE-MIBagentDhcpServerExcludedAddressRangeStatus

agentDhcpServerExcludedAddressRangeStatus

Module: FASTPATH-DHCPSERVER-PRIVATE-MIB

OID (symbolic): FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeStatus

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.4

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-write

Description: This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.

What is agentDhcpServerExcludedAddressRangeStatus?

This is the RowStatus of an excluded-address-range entry; it reads active(1) for a valid range, and setting it to destroy(6) deletes that excluded range. Use destroy to reopen a previously excluded block of addresses for DHCP assignment again.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.4
snmpwalk -v2c -c public <target> FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.4.1
snmpget -v2c -c public <target> FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.4.1 s <value>

Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (DHCP server) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeStatus OID value, configure state conditions and alerts, and monitor any Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (DHCP server) from a single console.

OID Breakdown

Upper-level ancestors (17 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12fastPathDHCPServerPrivateDNOS-DHCPSERVER-PRIVATE-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2agentDhcpServerPoolConfigGroupDNOS-DHCPSERVER-PRIVATE-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5agentDhcpServerExcludedAddressRangeTableDNOS-DHCPSERVER-PRIVATE-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1agentDhcpServerExcludedAddressRangeEntryDNOS-DHCPSERVER-PRIVATE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.4agentDhcpServerExcludedAddressRangeStatusFASTPATH-DHCPSERVER-PRIVATE-MIB