All MIBs › FAN-MIB › hpicfFanRecovering
hpicfFanRecovering
Module: FAN-MIB
OID (symbolic): FAN-MIB::hpicfFanRecovering
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: An indication that the switch fan entity is faulty. Before declaring a fan to be good after a failure is detected, the same good indication must happen five (5) times in a row. A failure indication is always TRUE, while a good indication could be FALSE, hence this parameter is used to count the repeated good indications before declaring the fan to be good
What is hpicfFanRecovering?
This read-only integer is a counter used internally by the switch to confirm a fan has truly recovered from a fault: the description states a failed fan must report a good indication five times in a row before it is declared healthy again, and this value tracks that repeated-good count. An admin would generally not act on the raw number directly, but its presence explains why a fan's state may briefly lag behind reality after a fault clears. For example, after physically reseating a failed fan, this counter would need to reach 5 before hpicfFanState flips back to ok(5).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.5 snmpwalk -v2c -c public <target> FAN-MIB::hpicfFanRecovering
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.5.1 snmpget -v2c -c public <target> FAN-MIB::hpicfFanRecovering.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpicfFanRecovering.1
Start monitoring HP Networking switch chassis (HP ProCurve/HPE, HP-ICF platform) — fan tray health with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FAN-MIB::hpicfFanRecovering OID value, configure state conditions and alerts, and monitor any HP Networking switch chassis (HP ProCurve/HPE, HP-ICF platform) — fan tray health from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.54 | hpicfFanMIB | FAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.54.2 | hpicfEntityFan | FAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1 | hpicfFanTable | FAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1 | hpicfFanEntry | FAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.5 | hpicfFanRecovering | FAN-MIB |