All MIBs › EtherLike-MIB › dot3OutPauseFrames
dot3OutPauseFrames
Module: EtherLike-MIB
OID (symbolic): EtherLike-MIB::dot3OutPauseFrames
OID (numeric): 1.3.6.1.2.1.10.7.10.1.4
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description:
A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation.
This counter does not increment when the interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.10.1.4 snmpwalk -v2c -c public <target> EtherLike-MIB::dot3OutPauseFrames
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.10.1.4.1 snmpget -v2c -c public <target> EtherLike-MIB::dot3OutPauseFrames.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.10 | dot3PauseTable | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.10.1 | dot3PauseEntry | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.10.1.4 | dot3OutPauseFrames | EtherLike-MIB |