All MIBs › EtherLike-MIB › dot3HCStatsFrameTooLongs
dot3HCStatsFrameTooLongs
Module: EtherLike-MIB
OID (symbolic): EtherLike-MIB::dot3HCStatsFrameTooLongs
OID (numeric): 1.3.6.1.2.1.10.7.11.1.4
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: A count of frames received on a particular interface that exceed the maximum permitted frame size.
The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
This counter is a 64 bit version of dot3StatsFrameTooLongs. It should be used on interfaces operating at 10 Gb/s or faster.
Discontinuities in the value of this counter can
occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
What is dot3HCStatsFrameTooLongs?
This 64-bit counter tracks frames received on this interface that exceeded the maximum permitted frame size, serving as the high-capacity version of dot3StatsFrameTooLongs for 10 Gb/s and faster links. Admins watch it to detect oversized-frame problems such as misconfigured jumbo frames or a misbehaving device sending frames larger than the interface's MTU allows. For example, a rising count here after enabling jumbo frames on only part of a 10G network would indicate some devices are still sending frames the receiving interface considers too long.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.11.1.4 snmpwalk -v2c -c public <target> EtherLike-MIB::dot3HCStatsFrameTooLongs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.11.1.4.1 snmpget -v2c -c public <target> EtherLike-MIB::dot3HCStatsFrameTooLongs.1
Start monitoring Vendor-neutral Ethernet interface, any manufacturer (IEEE 802.3 EtherLike statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EtherLike-MIB::dot3HCStatsFrameTooLongs OID value, configure state conditions and alerts, and monitor any Vendor-neutral Ethernet interface, any manufacturer (IEEE 802.3 EtherLike statistics) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.11 | dot3HCStatsTable | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.11.1 | dot3HCStatsEntry | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.11.1.4 | dot3HCStatsFrameTooLongs | EtherLike-MIB |