All MIBs › EdgeSwitch-SNTP-CLIENT-MIB › agentSntpClientSourceInterface
agentSntpClientSourceInterface
Module: EdgeSwitch-SNTP-CLIENT-MIB
OID (symbolic): EdgeSwitch-SNTP-CLIENT-MIB::agentSntpClientSourceInterface
OID (numeric): 1.3.6.1.4.1.4413.1.1.17.1.1.14
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-write
Description: A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A non-zero value indicates ifIndex for the corresponding interface entry in the ifTable is selected. A zero value indicates the source-interface un-selection.
What is agentSntpClientSourceInterface?
Pins outgoing SNTP requests to a specific source interface (VLAN, routed port, loopback, or tunnel) by ifIndex; a value of zero means no source interface is selected and the switch uses its normal routing decision. This matters when a firewall or ACL upstream only permits NTP traffic from one known management address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.17.1.1.14 snmpwalk -v2c -c public <target> EdgeSwitch-SNTP-CLIENT-MIB::agentSntpClientSourceInterface
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.17.1.1.14.1 snmpget -v2c -c public <target> EdgeSwitch-SNTP-CLIENT-MIB::agentSntpClientSourceInterface.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.17.1.1.14.1 s <value>
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (SNTP time synchronization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-SNTP-CLIENT-MIB::agentSntpClientSourceInterface OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (SNTP time synchronization) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.17 | agentSntpClientMIB | EdgeSwitch-SNTP-CLIENT-MIB |
| 1.3.6.1.4.1.4413.1.1.17.1 | agentSntpClientObjects | EdgeSwitch-SNTP-CLIENT-MIB |
| 1.3.6.1.4.1.4413.1.1.17.1.1 | agentSntpClient | EdgeSwitch-SNTP-CLIENT-MIB |
| 1.3.6.1.4.1.4413.1.1.17.1.1.14 | agentSntpClientSourceInterface | EdgeSwitch-SNTP-CLIENT-MIB |