EdgeSwitch-SNTP-CLIENT-MIB :: agentSntpClientServerRefClkId

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-SNTP-CLIENT-MIB › agentSntpClientServerRefClkId

agentSntpClientServerRefClkId

Module: EdgeSwitch-SNTP-CLIENT-MIB

OID (symbolic): EdgeSwitch-SNTP-CLIENT-MIB::agentSntpClientServerRefClkId

OID (numeric): 1.3.6.1.4.1.4413.1.1.17.1.1.12

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: This is the value of the Reference Identifier in the last received packet defined as follows. Reference Identifier: This is a 32-bit bitstring identifying the particular reference source. In the case of NTP Version 3 or Version 4 stratum-0 (unspecified) or stratum-1 (primary) servers, this is a four-character ASCII string, left justified and zero padded to 32 bits. In NTP Version 3 secondary servers, this is the 32-bit IPv4 address of the reference source. In NTP Version 4 secondary servers, this is the low order 32 bits of the latest transmit timestamp of the reference source.

What is agentSntpClientServerRefClkId?

The 4-byte NTP Reference Identifier from the last received packet -- an ASCII code for a stratum-0/1 source, or a packed IPv4 address/timestamp fragment for secondary servers. Mostly useful for diagnosing which physical clock source is ultimately feeding the switch's time.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.17.1.1.12
snmpwalk -v2c -c public <target> EdgeSwitch-SNTP-CLIENT-MIB::agentSntpClientServerRefClkId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.17.1.1.12.1
snmpget -v2c -c public <target> EdgeSwitch-SNTP-CLIENT-MIB::agentSntpClientServerRefClkId.1

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (SNTP time synchronization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-SNTP-CLIENT-MIB::agentSntpClientServerRefClkId OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (SNTP time synchronization) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.17agentSntpClientMIBEdgeSwitch-SNTP-CLIENT-MIB
1.3.6.1.4.1.4413.1.1.17.1agentSntpClientObjectsEdgeSwitch-SNTP-CLIENT-MIB
1.3.6.1.4.1.4413.1.1.17.1.1agentSntpClientEdgeSwitch-SNTP-CLIENT-MIB
1.3.6.1.4.1.4413.1.1.17.1.1.12agentSntpClientServerRefClkIdEdgeSwitch-SNTP-CLIENT-MIB