All MIBs › EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB › agentDiffServServiceIfOperStatus
agentDiffServServiceIfOperStatus
Module: EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB
OID (symbolic): EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus
OID (numeric): 1.3.6.1.4.1.4413.1.1.7.4.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current operational state of the DiffServ service interface. If agentDiffServGenStatusAdminMode is disable(2) then agentDiffServServiceIfOperStatus should be down(2). If agentDiffServServiceGenStatusAdminMode is changed to enable(1) then agentDiffServServiceIfOperStatus should change to up(1) if the service interface is ready to send and receive DiffServ traffic; it should remain in the down(2) state if the underlying interface hardware is not in a link up condition, if the policy definition represented by agentDiffServServicePolicyIndex is incompatible with the interface (e.g., requires more bandwidth than the current capacity of the interface), or if the policy definition is considered to be incomplete (e.g., one or more composite rows is not in the active(1) state).
What is agentDiffServServiceIfOperStatus?
Read-only operational status (up/down) of DiffServ on this interface: it stays down if the global admin mode is disabled, the underlying link is down, the attached policy needs more bandwidth than the interface has, or the policy definition is incomplete; an admin checks this to confirm a configured policy is actually active on the wire.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.7.4.1.1.4 snmpwalk -v2c -c public <target> EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.7.4.1.1.4.1 snmpget -v2c -c public <target> EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus.1
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (DiffServ QoS policy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (DiffServ QoS policy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.7 | fastPathQOSDiffServPrivate | EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB |
| 1.3.6.1.4.1.4413.1.1.7.4 | agentDiffServServiceGroup | EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB |
| 1.3.6.1.4.1.4413.1.1.7.4.1 | agentDiffServServiceTable | EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB |
| 1.3.6.1.4.1.4413.1.1.7.4.1.1 | agentDiffServServiceEntry | EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB |
| 1.3.6.1.4.1.4413.1.1.7.4.1.1.4 | agentDiffServServiceIfOperStatus | EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB |