EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB :: agentDiffServPolicyAttrStmtPoliceColorExceedIndex

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB › agentDiffServPolicyAttrStmtPoliceColorExceedIndex

agentDiffServPolicyAttrStmtPoliceColorExceedIndex

Module: EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB

OID (symbolic): EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorExceedIndex

OID (numeric): 1.3.6.1.4.1.4413.1.1.7.3.4.1.42

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: Index of the DiffServ Class Table row whose class definition is used to specify the policing color exceed mode and value. This identifies incoming traffic categorized as 'yellow' packets in the network. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8).

The DiffServ class referred to by this object must comply with the following restrictions:

1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an agentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively.

2) Must not conflict with any (non-excluded) match conditions in the classifier used for this policy-class instance, as indicated by the agentDiffServPolicyInstClassIndex object.

3) The color exceed mode and value identified by this class index must not be the same as an existing color-aware exceed mode and value defined by the agentDiffServPolicyAttrStmtPoliceColorConformIndex object.

A class index value of 0 for this object indicates exceed color awareness is not being used. When the agentDiffServPolicyAttrStmtPoliceColorConformIndex object is 0, indicating color-blind operation, this object must also be 0. When a non-0 value is used for the agentDiffServPolicyAttrStmtPoliceColorConformIndex object, this object may remain set to 0 if exceed color awareness is not desired, or may be set to an appropriate class index value to activate exceed color aware mode.

What is agentDiffServPolicyAttrStmtPoliceColorExceedIndex?

Points to a Class Table row that defines the color-aware 'exceed' criteria (identifying 'yellow' packets) for two-rate or single-rate policing; a value of 0 disables exceed color awareness, and it must be 0 whenever the paired ConformIndex object is 0.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.7fastPathQOSDiffServPrivateEdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.7.3agentDiffServPolicyGroupEdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.7.3.4agentDiffServPolicyAttrTableEdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.7.3.4.1agentDiffServPolicyAttrEntryEdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.7.3.4.1.42agentDiffServPolicyAttrStmtPoliceColorExceedIndexEdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB