All MIBs › EdgeSwitch-NSF-MIB › agentNsfLastStartupReason
agentNsfLastStartupReason
Module: EdgeSwitch-NSF-MIB
OID (symbolic): EdgeSwitch-NSF-MIB::agentNsfLastStartupReason
OID (numeric): 1.3.6.1.4.1.4413.1.1.46.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The type of activation that caused the software to start the last time.
unknown: The switch rebooted for an unknown reason. power-on: The switch rebooted. This could have been caused by a power cycle or an administrative 'Reload' command. warm-admin-move: The administrator issued a command for the stand-by manager to take over. cold-admin-move: The administrator issued a command for the stand-by manager to take over, but the system was not ready for a warm-failover. warm-auto-restart: The primary management card restarted due to a failure, and the system executed a nonstop forwarding failover. cold-auto-restart: The system switched from the active manager to the backup manager and was unable to maintain user data traffic. This is usually caused by multiple failures occurring close together
What is agentNsfLastStartupReason?
Reports why the switch's software last started: unknown, a power-on/reload, an administrator-triggered warm or cold failover to the standby manager, or an automatic warm/cold restart following a failure. A cold-auto-restart specifically flags that multiple failures happened close together and NSF could not maintain a seamless failover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.46.2.3 snmpwalk -v2c -c public <target> EdgeSwitch-NSF-MIB::agentNsfLastStartupReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.46.2.3.1 snmpget -v2c -c public <target> EdgeSwitch-NSF-MIB::agentNsfLastStartupReason.1
Start monitoring Ubiquiti EdgeSwitch, Broadcom FastPath-based stackable switch (Non-Stop Forwarding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-NSF-MIB::agentNsfLastStartupReason OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch, Broadcom FastPath-based stackable switch (Non-Stop Forwarding) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.46 | fastPathNsf | EdgeSwitch-NSF-MIB |
| 1.3.6.1.4.1.4413.1.1.46.2 | agentNsfGroup | EdgeSwitch-NSF-MIB |
| 1.3.6.1.4.1.4413.1.1.46.2.3 | agentNsfLastStartupReason | EdgeSwitch-NSF-MIB |