All MIBs › EXTREME-ERPS-MIB › extremeErpsRingNodeStatus
extremeErpsRingNodeStatus
Module: EXTREME-ERPS-MIB
OID (symbolic): EXTREME-ERPS-MIB::extremeErpsRingNodeStatus
OID (numeric): 1.3.6.1.4.1.1916.1.46.2.1.13
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: General attributes giving the current status of the ring by specifying the events/status currently present.
signalFailOnEast(0) - Signal-failure on Ring Port 1 signalFailOnWest(1) - Signal-failure on Ring Port 2 remoteSignalFailOnEast(2) - Remote-signal-failure received on Ring Port 1 remoteSignalFailOnWest(3) - Remote-signal-failure received on Ring Port 2 rplBlocked(4) - Rpl-blocked waitToRestoreTimerRunning(5) - Wait-to-restore-timer-running holdTimerRunning(6) - Hold-timer-running guardTimerRunning(7) - Guard-timer-running
Value 1 of the bit signifies the presence of the event associated with that bit and value zero signifies the absence of that event For example: If a signal failure is received on Ring port 1 and R-APS(SF) is received on port 2, then Bit 1 and 4 will have the value as 1.
Signal failure on a port represents Port failure indication received from the monitoring entity. This does not depend on hold off timer status. If signal failure is received on ring port 1 and hold-off timer is started, then both signalFailOnEast and holdTimerRunning will have the value as 1.
What is extremeErpsRingNodeStatus?
A bitmask of active ring conditions such as signal failure on the East or West port, remote signal failure received on either port, the RPL being blocked, or the wait-to-restore, hold, or guard timers currently running, letting an admin see multiple simultaneous ring events at a glance rather than polling several separate objects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1916.1.46.2.1.13 snmpwalk -v2c -c public <target> EXTREME-ERPS-MIB::extremeErpsRingNodeStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1916.1.46.2.1.13.1 snmpget -v2c -c public <target> EXTREME-ERPS-MIB::extremeErpsRingNodeStatus.1
Start monitoring Extreme Networks Ethernet switch, ring/metro backbone (ITU-T G.8032 ERPS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXTREME-ERPS-MIB::extremeErpsRingNodeStatus OID value, configure state conditions and alerts, and monitor any Extreme Networks Ethernet switch, ring/metro backbone (ITU-T G.8032 ERPS) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1916 | extreme | A3COM51-SS9000SX |
| 1.3.6.1.4.1.1916.1 | extremeAgent | EXTREME-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1916.1.46 | extremeErps | EXTREME-ERPS-MIB |
| 1.3.6.1.4.1.1916.1.46.2 | extremeErpsRingTable | EXTREME-ERPS-MIB |
| 1.3.6.1.4.1.1916.1.46.2.1 | extremeErpsRingEntry | EXTREME-ERPS-MIB |
| 1.3.6.1.4.1.1916.1.46.2.1.13 | extremeErpsRingNodeStatus | EXTREME-ERPS-MIB |